Universal Devices Forum

I've had my EISY for quite some time and did no updates. This week I decided it was time (from 13.2) and went with doing a flash and have everything at the latest versions. After doing restores, everything look to be running, but I'm not getting any updates from either Ecobee4 or DavisWeather. I haven't touched this in years so I suspect I own whatever is wrong, but I'm at a loss. I spent quite some time today on just Ecobee. I now know that they may have blocked the API. But before the update, everything seemed to be working. After some struggles, by luck I checked Ecobee on the mobile app and found it was offline. I rebooted and its working but won't connect to ecobee.com. That may not be related but I can't say for certain. So I decided to now try to get my DavisWeather back up. I'd suspect this might be easier, and may shed some light on what I'm forgetting on Ecobee. I attached a screen shot of the console. There may be more clues somewhere else, but I'm at a loss.

anyone see one that works withe the Polisy. I know I can do z-wave, but looking for a Kasa like wi-fi one?

I know this likely needs a ticket, so I'll open one in a bit, but thought others may have experienced the same or have some insight. I've got an EISY and am using the new GUI (not IOX). I upgraded a couple of nights back to all of the latest code releases. I have a Program that runs a couple of scenes every night, 30 minutes before Sunset. Its worked for years. After the upgrades it is not running. I have looked through a few of the logs, but don't see any errors and it seems like our list of logs has exploded. Anyone have a quick insight where to look for an error or what might have gone wrong? From the programs listing it shows a next run time for tomorrow at about 30 minutes before sunset, but there is no "Last Run Time" nor "Last Finish Time" documented in the EISY-UI. I've right clicked to copy the program and I get the next dialog box, but it won't paste, so maybe another GUI error? I have Alexa connected and have spokens set up for this Program, it will run and did last night, if I ask Alexa to run it. Any insights?

After mistakenly doing the beta upgrade and migrating pg3 nodes all seem to work except audio player. I gaet this message, Error loading node n011_0: Profiles loaded but nodedefs missing How do I fix? Thanks Also this message for avremote, Error loading node n001_controller: Profiles loaded but nodedefs missing

We've been hearing from a lot of you — questions about what's ready, what's coming, and what still needs Admin Console. Rather than answer the same questions one at a time, we wanted to create a single place you can always come back to for the latest picture. This is that page. We'll keep it updated as things move forward. We've been working hard to bring every Admin Console feature into eisy-ui, our modern browser-based interface. We want to be transparent about where things are today — what's ready, what's coming, and what's still on the list. If you're on an older firmware, you may already see an early version of eisy-ui — but it may be missing key features, including backup. Upgrading to IoX 6.1.1 is required to use eisy-ui for day-to-day management. For the next few weeks, keep Admin Console available for anything not yet in the browser — but check back often, as updates are moving quickly. If you're feeling adventurous, a beta build may already have what you need. If you're currently on a version lower than 6.0.0, please open a support ticket for personalized upgrade instructions before proceeding. eisy-ui can receive incremental updates independently of firmware, so this document tracks eisy-ui versions specifically — not firmware versions. A Note on Firmware Upgrades Getting to IoX 6.1.1 may have had some bumps. We know. Many of the issues users experienced during earlier firmware upgrades have been resolved in 6.1.1 itself — and once you're there, those problems shou

I have been away from keeping up with changes as everything has been working fine. Just over a week ago everything stopped working no single commands or programs. Finally got around to checking things out and the Admin Console works fine and shows everything appears fine, but nothing works. Would appreciate any guidence . Thanks ISY Error Log.v5.8.4__Mon 2026.09.07 07.03.12 PM.txt

Is there an alternate eisy-ui theme? I looked through the settings but did not find any way to change it. The black (dark) theme is very hard on the eyes and difficult to read.

I'm running a first generation Eisy with the latest IoX (recent update). I have the Z-Matter Dongle where I have my Zigbee devices communicating to the Eisy system. The dongle is directly connected to the Eisy's USB port on the side, no extension cable in the mix. This setup has worked flawlessly for years through many updates and rebuilds... I've never had any issues with Zigbee devices suddenly not communicating. I performed the update as instructed by doing the Z-Wave backup first, backing up IoX, PG3, then updating and everything seemingly went just fine except Zigbee is failing to communicate. I see a lot of threads where Z-Wave and Zigbee seem to be a special case, so before I just start clicking things to try to get it to work and make matters worse, I'd like to see if anyone can help troubleshoot this. I'm getting this message when I query any one of the Zigbee devices. It seems that there is possibly one node from one device that is working (alarm siren) however all other nodes from this device seem to be blank and unavailable... I just can't remember if they were like that before or not. The alarm sensors (water alarm sensors) all seem to be failing to communicate. When I query it I get: Here's a list of these devices (my only Zigbee devices): When I log into the web UI, I get this yellow banner across the bottom left which as you can see is clearly related to the Zigbee issue(s): Also in the Java Admin Console, I'm seeing this when I click on the Zigbee menu across

Has anyone programs marked to run at startup not running on startup? Beta version 3.1.2-3 -Tim

Trying to get used to working with my system through eisy-ui since the admin console is going away. I can't seem to find a way to disable Insteon modules in eisy-ui. I have some seasonal modules that I like to turn off when I'm not actually using them. Thanks

One handy feature of UD Mobile is “Advanced Status Configuration”, allowing change of icon and colours based on states of other programs and nodes. Will this be an upcoming feature of EISY-UI?

I've been using the eisy-ui pre-release for a couple of months and still have the Admin console. I'm now lost in the weeds. I tried to migrate to the new eisy-ui. In trying to open I get a notice that eisy-ui can't be found. Can anyone please walk me through all the steps to replace my Admin console with the new release of eisy-ui and if I need to and how to delete the pre-release if necessary? Note: running on the latest Apple OS Thanks