Aida64 Forum

720 x 2560 & 720 & 1920 Pokémon Sensor For Aida64 for more detail, see my store. https://aidadeco64.etsy.com

I've got my sensor panel created and I'm really happy with it. I've got the dials colored green, turning to yellow then red. What should I set my warning and maximum temperature values at? I've got CPU, GPU, Motherboard, PCI-E, VRAM and SSD's.

Problem with Nvidia drivers: versions 616.64 and 616.56 block the USB monitors used by AIDA64. I had to revert to version 610.88.

Hello all, I am using AIDA 64 for a custom sensor panel on an ASUS Ryujin III cooler display. My PC is maximus hero z790, Intel I9 14900k, (2x48gb) 24Gbp/s DR Hynix m die RAM. Its an intermittent issue that gradually gets worse over the course of a single boot session and goes away after a reboot. After about a day or so the sound crackles and pops and gets worse until there's these periods of white noise static explosions that are very loud. I suspect AIDA 64 to be the cause. Because I ran the computer without AIDA 64 at boot and the problem did not reoccur for several days when it would normally occur within about 1 day. I will be doing more testing to repeat and confirm this. Because of the nature of the problem this testing will take a long time. Using WPR/WPA, I documented a strong correlation between long USBXHCI.SYS latency and duration of AIDA 64 session. As the session duration continues over the course of a day or so the max latency values climb from 0.1 ms to 30 ms. Closing AIDA 64, or closing AIDA 64 and reopening it reliably returns latency value back down, however the sound issue does not reliability go away. Please advise

Hello I think this happens after the recent AIDA update (not sure though). The Turzx 8.8 screen works for a while but then freezes. I then need to restart Aida and sometimes unplug the screen to restart it as well. Dont know if it helps, this is the driver version of turzx 8.8 V1.0 in the hardware manager: 10.0.26100.8972. AIDA is up to date stable version. Thank you

Why don't the gadget settings include the following items: GPU Name CPU Name ?

promote somes sensors to riuyin 3

Hello AIDA64 doesn't show the CPU/MB temperatures of ECS B75H2-M3 (V1.0) and the voltages are wrong too 🤔

I have a Corsair iCUE LINK H150i LCD connected through an iCUE LINK System Hub. AIDA64 sees the System Hub and LCD in the Corsair Link Dump, but no coolant temperature appears under Computer → Sensor. SignalRGB is able to read the H150i coolant temperature, so the sensor is available from the hardware. I tested with SignalRGB completely closed and there was no change. Corsair Hydro Platinum Sensor Support and Corsair Link Sensor Support are both enabled. Is iCUE LINK System Hub coolant-temperature monitoring currently supported by AIDA64? AIDA64 Extreme v8.35.8400. System Hub VID/PID: 1B1C:0C3F . Corsair Link Dump below... ------[ Versions ]------ Program Version : AIDA64 Extreme v8.35.8400 LLKD Version : 1021 BenchDLL Version: 4.7.931.8-x64 Windows Version : Microsoft Windows 11 Pro 10.0.26200.9168 (64-bit) GetProductInfo : 0x00000030 ------[ Motherboard Info ]------ Motherboard ID : Motherboard Model : MSI MPG Z690 Carbon WiFi (MS-7D30) Motherboard Chipset : Intel Alder Point-S Z690, Intel Raptor Lake-S DMI MB Manufacturer : Micro-Star International Co., Ltd. DMI MB Product : MPG Z690 CARBON WIFI (MS-7D30) DMI MB Version : 1.0 DMI MB Serial : 07D3011_MB1E278307 DMI SYS Manufacturer: Micro-Star International Co., Ltd. DMI SYS Product : MS-7D30 DMI SYS Version : 1.0 DMI SYS Serial : Default string DMI BIOS Version : 1.O0 ------[ DevClass / Human Interface Devices ]------ HID-compliant consumer control device \\?\hid#vid_04d9&pid_fc61&mi_02&col01#9&36b93218&0&0000#{4d1e55b2-f1

Looking for one of the various moderno themes in 480x320. I see they exist, but not on their site for downloading

ROG Crosshair 2006 – missing/incorrect motherboard sensor readings in AIDA64 Hi, I’m experiencing a sensor monitoring issue in AIDA64 on an ASUS ROG Crosshair 2006 (X870E) . In the latest AIDA64 version , some motherboard sensors either disappear completely or show incorrect values. In the previous version , the sensors would disappear intermittently: sometimes they were detected correctly after launching AIDA64, and sometimes they were missing. The issue seems related to ASUS monitoring software. After installing Armoury Crate or ASUS MB Manager , motherboard sensor readings in AIDA64 become unreliable or disappear. At the same time, HWiNFO reads the same motherboard sensors correctly and consistently , even when AIDA64 has the issue. System: ASUS ROG Crosshair 2006 (X870E) Windows 11, latest build AIDA64: latest version Armoury Crate / ASUS MB Manager installed HWiNFO: no sensor issues Could you please check whether there is a compatibility issue with sensor monitoring on the ROG Crosshair 2006, especially when ASUS monitoring services are installed? I can provide sensor dumps, ISA Sensor Debug information, or other diagnostics if needed.

Hi, I've a Corsair Dom Plat RAM module. It keep disappearing from the system. When it disappear everything that's reading its info went dark. AIDA64 sensor panel temps readout blank, SignalRGB stop RGBing (stop update RGB), even iCUE also didn't see the RAM too. Any idea or where to even begin collecting info to troubleshoot this? Only way to get it back is to power cycle. Restart won't work. Need shutdown, wait for lights out, then turn on again. Thanks