RedSquare Forum

I need the large metal pulley that houses the needle bearing and ball bearing with the two grooves. The outer bearing seemingly wallowed out its hole and my welder guy cannot revive it. Shipping to Erie PA. 16509.

I am helping an older gentlemen get his Wheelhorse back up and running. We have determined that it is the Trigger that is faulty and he would like to find another in working condition. It is for an electric start 12hp.

I was at an auction yesterday and bought this... It fired right up, blower works, and it moves fine. I did some reading and i just want your opinion on how decent of a mower it is? Its a 314A. I bought it to blow snow as itll be eaiser to do my sidewalks and stuff with then my quad. I gave 230bucks for it.

Happy Birthday @HyperPete , we are glad you were born.

September 8, 1960, Alfred Hitchcock's classic film Psycho was released in the USA on September 8, 1960, debuting in New York City and becoming a massive cultural and financial success, establishing new standards in horror and cinema.

Have a GREAT day Dave. See you Saturday morning here at the Meet & Greet.

Working on a 48 inch deck from the 1980s or 1990s. Blade pulley is pressed on, no key, just a round shaft. Not double d. Two holes on the pulley. I tapped the holes to 5/16 x 18 NC. I used a steering wheel puller and one of the bolts pulled through the 5/16 threads. The pulley didn't move. I put flat pry bars on both sides with pressure and hit the shaft with a BFH. Nothing moved How do I get the pulley off? The other two pulleys came off. The center one just pulled off by hand. The outer one by the chute came off with the tapped holes with the steering wheel puller. Also, how do you get the bearings out of the housings? I removed a snap ring on it already.

Documenting the carb rebuild:

Documenting my flat tire fix: https://youtube.com/shorts/nQQGmIp9a-M

I have, I think, a 1985 or 1986 312-8 with K301. The model on the tractor is worn off. I took the flywheel off this afternoon and tested resistance and I am getting infinity resistance at the connector, and even when piercing the wire jacket directly on both yellow wires. All the magnets are on the flywheel properly and a wrench will stick to the magnets. Is this a 3amp stator? Is there a part number I can look up for a replacement? Also, for my own knowledge, how is the spark plug firing like this? I know this guy has points on it. Only one wire going to the coil. Pictures: https://photos.app.goo.gl/61BHYDfJfh1ChoVFA

Rear mount leaf collection system blower. Trailer with Canvas avail for an additional $100. $200 for both or Would trade both for a snow thrower attachment that mounts to the older style long frame for a Wheel Horse Charger 12. Upstate NY Pick Up only. Excellent condition. Even the decals are original.

Has anyone tried a seat of this variety on a 312-8? Looking for something to smooth the ride. https://www.tractorsupply.com/tsc/product/uni-pro-350-utility-mechanical-suspension-seat-black-vinyl-6084327