Foro OPNsense Forum

Quote from: bimbar on September 07, 2026, 02:47:35 PM There are however a few popular youtube videos pushing that scenario, which I disapprove ;) . After reading your comment, I did a search for articles relating to the set up of an OPNsense T...

I'll make this short: I looked for "harmless" and "easy" in the release notes, but I don't see any reference to firewall rules migration... [code]% git grep -i -e easy -e harmless community community/15.1/15.1:interface. Developers are invited to che...

Ah, OK, ja sieht doch nicht so schlecht und unübersichtlich aus :-) Das mit dem DNS ist bei mir etwas anders, wenn ich einen Domaincontroller habe, der von den unterschiedlichen VLans erreichbar sein soll. Aber das ist natürlich nicht die regel. OK, da...

Quote from: franco on September 09, 2026, 09:27:40 AM > IIUC, someone created this thread when he found that he can not enable or disable firewall rules after an upgrade anymore, and was advised to install a plug-in to fix that. Which is correct, b...

I have two opnsense (26.7.3_8) running on different tin as a HA pair (active / standby) I have a 500/50 Mbit internet connection and I have noticed (via speedtest.net ) that my test results when using the real IP address as gateway are full 500Mbit but ...

System > Trust > Certificates Click on the "+", select "Create Certificate Signing Request", continue with all your data. After you signed the CSR with your CA in the same menu click on the "edit" icon for the CSR - the little pencil. Paste the signed ...

When you perform the step on the Certificates page to generate the CSR, it creates a line on that page. Once you have the cert from the CA, you click the Edit button on that same line. There'll be an empty box in the edit page for you to paste in the c...

Hier die Leases mit meinem IOT VLAN ausgeklappt.

Aber Auto collect will man doch sowieso. Dann wird in jedem VLAN die Interface-Adresse der OPNsense an die Clients verteilt. Goldrichtig. Und hinterher hast du alle Subnets/VLANs übersichtlich in einer Liste, und einen Reiter weiter alle Reservierungen...

Mmh, OK, finde ich nicht so schön und übersichtlich beim ISC. Also unter Kea DHCP v4 unter Settings und Interfaces anklicken / auswählen, wo man einen DHCP benötigt z.B. 5 Stück und dann unter Subnets pro VLan je einen neuen Subnet Eintrag anlegen, ric...

My OPNsense box is a little over two years old and I had Zenarmor running for two years with a home subscription, using a local elasticsearch DB. The lifetime writes of my SSD are about 5.7 TiB, which is very mild compared to the rated typical lifespan...