Foro Raptor Forum

Hey everyone, Looking for some tuning advice for my Raptor 700. I recently changed up my exhaust setup and I'm having a hard time getting the fueling dialed in. My setup is a 2025 Raptor 700r with a Barker's full single exhaust, Hmf fuel optimizer, with no airbox lid (No aftermarket intake). My previous exhaust was a fmf q4 slipon. Ever since putting the Barker's full system on, the bike is backfiring a lot. I am also getting a lot of small pops at low RPMs. I have tried tuning the HMF... Backfiring & Low-RPM Popping After Switching to Barker's Full Single (HMF Optimizer)

Hi, New here at the forum. I`ve seen some old threads about this but perhaps there is room for a new one. First: Maier or OEM plastics? And why? Second: I am looking for a white front, rear and tail and black hood and tank cover. Is there an "easy" way to find the OEM ones in this colors? I have an 2010 Raptor but I`m dabbeling with the idea of coverting to the new bodykit. What kind of brackets and other stuff is needed? Thanks for any help.

I have a raptor 660 that i’ve been ripping up north michigan and around my property and after a couple years I’ve started having issues that i can’t figure out it was my dads quad until he gave it to me for my birthday and i’ve fixed a couple things like the carrier bearing and clutch, it was running great till it was left one winter and started having carb issues and a rattle on the left side the issue i think i’m having with the carb is about mid throttle it kinda bogs down then catches up... 660 issues

Has anyone ordered anything from monster lately? Just ordered a big 3 setup 3 days ago and still don’t have a tracking number.. monster shorty, pc6, intake

:thumbsup: SO what did u do to you bike today???

on my 2023 raptor 700r , i ordered a big 3 kit with a custom dyno jet 6 tuned to the parts i have. i was told by a friend i should do an ais delete but he told me to late once i already ordered the custom tune. would i have to re-tune if i do this? or can i just slap it on

Need a PC6 map for a 2020 Raptor 700r single Monster exhaust pipe, and FCI/cold air intake.no lid

So I might have a bit of a weird one here but I'm running out of options, I have a 2007 raptor 700r that I've been building for about 2 years now (progress has been slow) but it is all back together now. Heres the issue, it won't run but it will run when I unplug the coolant temp sensor that is on the back of the head. I have a vortex ecu and wiring harness that is for the gen 2 Raptors since its kind of hard to find stuff for first gen but to be able to run the vortex and wiring harness for... Electrical Issue (I believe)

Hello. I'd like to start a thread so we can share where have we taken our machines. I'll go ahead and post my tour from the Sunday. It was sunny and warm so it was a perfect condition for a snowy road. I hope you'll like it :smile As the privacy goes I'd rather not tell the location. Hope you understand. About half the way we took a break at a nice vista point. We were hoping we'll reach our destination in the hills far away from... Post your trip/trail

I have a stock 2023 raptor 700r . i want to put a full dasa exhaust. im aware i need a fuel programer. but can i tune it with the stock foam air filter? or is a k&n style cone filter a MUST!! I know it helps gains but will i damage anything tuning it with a stock foam filter. thanks.

What tail lights fit on the raptor 660? I recently bought a raptor and im finishing putting it together. But the wires was pulled out the tail light so i need a new one. What tail lights fit without modification? I prefer a tail light with leds im not worried about wiring i have a 04-06 r1 wiringloom so i need to do the wiring anyway

Hey guys! After an extended hiatus from the Yamaha community I decided to come back in and add a new machine along side my 2012 LTZ400. I picked up a brand new 26 700r back in July and needless to say it is a huge jump from my 400. However with my previous experience in Yamahas with halogen headlights (Wolverine 450, Rhino 700, 26 Kodiak 450) the output is absolutely abysmal to borderline useless. I upgraded the H6m Bulbs to Auxito P15 6500k (5000LM) bulbs and the output improved but not... First time Raptor owner. Need help shedding LIGHT on some issues.