It's time. I have had the 66% larger Mishimoto Radiator, 180* Thermostat, and Mishimoto Silocone Hoses for over a year now, and it is time. I also have the upgraded Mishimoto Trans Cooler Line Thermal Bypass Valve Kit I'd like to install at the same time. No current coolant leaks or loss of fluid, but I have to drive 500 miles each way to Southern California for a Funeral of a friend a week from tomorrow. I have heard, "There are those who have, and those that will have a stock radiator... Mishimoto Radiator, 180* Thermostat, and Silicone Hoses Upgrade. Morimoto LED XB Headlights too.
Jeep Trackhawk Forum forum
www.jeeptrackhawk.org ↗XenForo forum in English.
- Discussions per day
- 0
- Discussions collected
- 35
- Messages per day
- 2
- Sections
- 0
- Sources tracked
- 1
- Engine
- XenForo
Latest discussions
Collected every 4 hours from the forum's public feed. Only the title, the link and the beginning of the message are reproduced; every link points back to the source.
Hello everyone, just wanted to introduce myself. I have a 2021 Widebody Trackhawk that I’ve have built and modified over the years. I Ordered a build in '21. Ivory 3 coat with the Ski Gray interior. Current mods include a Ravelco, JLT intake, catch can, Kong-ported stock blower, ported snout, race bearings, 2.65 upper, tensioner, 108mm throttle body, Fore fuel rails, BAP, IDX 1300 injectors, E85 Dusterhoff tune, FI Interchiller, and a 3-inch exhaust with no cats or suitcase, four high-flow... '21 WB Trackhawk
Ladies and Gentlemen, I have a 21 TH. I want to service all my oils as I acquired this truck in Dec 2025. I like Amsoil, have had great luck with 22 Mach 1 Mustang (6-Sp). I have a warranty and an extended warranty. I want to do the Engine Oil, Transfer care, and front and rear Differentials. I would prefer to avoid the Local dealership (Future Jeep in Concord, CA). Anyone Local to Contra Costa County, Northern California? If so, do you have a shop you trust? This is not my daily... 2021 TH with 33K miles - Need a safe place for service in the East Bay Area (SF Bay Area, Northern CA, I live in 94517)
Be safe out there this weekend and enjoy your ONE day off. Lol
Set of 3-piece forged ANRKY AN15 wheels. 22” diameter , 11” wide. Michelin Pilot Super Sport tires included. These retail over $4500/wheel
What do you guys think, are these struts blown or still good? When they were on the car I lifted the boot and saw all this gunk around the top and assumed they were blown out. But after I took the spring off I saw all the gunk is from the bump stop wearing away. Never saw that before with a bump stop? Anyway - I've gotten no trouble codes and the suspension rides fine still, so I'm thinking still good? Normally I'd just replace shocks but at $900 a... Struts Still Good?
Hello gents. Anyone know of a source for a replacement vacuum line that runs from the purge control valve to the engine side of the throttle body? I understand that one could be made relatively easy, but I prefer to keep everything looking O.E. as possible. The boot and the hose on my 80k mile, 6.2L is showing signs of cracking. I'm starting here with the P0456: Evaporative Emissions System - Small Leak Detected engine fault that just popped up.
So i have a leaking motor mount and just ordered some new ones. And tips to doing them at home in the garage? I tried a couple years ago when one was leaking and was coming up short. I needed about 3/8" more clearance to get the stud out and wasnt able to, so going to tackle it again. Just wanted to get some insight ahead of time, thanks.
Has anyone swapped their 2018 Trackhawk screen with a 2019+ Trackhawk screen? I want to do it but would like to hear opinions if it messes up any factory features
I like (north) Texas a lot since I moved here, but one shortcoming is no 1/4 mile drag strips. Except Ennis, but they are far and haven't held open test n tune this year. There's an event at Texas Motor Speedway next weekend and theyre turning the pit row into an 1/8 mile drag strip - no prep. I'm going to go, it will be my fist drag strip visit since upgrades, I'm making 790 at the wheels on 93. Question is - can I burnout on that or is it just impossible still with AWD? What do you... Burnout or No?
Hi, Am I crazy or are there virtually no tires available in the factory 295/45/R20 size? I've read that the factory pirelli All season run flats can be expected to wear out in under 20k miles. And they cost $500 each, and are hard being run flats. Summit has one other tire.A Michelin Pilot Sport A/S 3 Plus Are there other tires that are slightly larger that will fit? Really appreciate it, didn't think this would be so much trouble. -Austin
It’s been too long since I’ve had to start selling my blood for parts, so here we go again. Lil Hemi needs a new heart after a failure in cylinder #2. The engine was removed, torn down to a short block, and sent to LME for short block disassembly, inspection, and measurements. Hopefully I can catch a break and there aren’t too many more surprises waiting for me but I have my doubts about my odds. Apparently the head gasket wasn’t the problem after all. 😂
35 discussions collected since 9 September 2026. Track this forum by keyword →