Smart Home Automation Forum

ETS.png (Size: 163.54 KB / Downloads: 9) ETS project download: CO16.zip (Size: 103.09 KB / Downloads: 4)

new version improvement: Optimized memory issues to fix BACnet/IP protocol stack startup. KCS_A2V3_V3.27.1.zip (Size: 1.26 MB / Downloads: 5) KCS_A6V3_V3.27.1.zip (Size: 1.24 MB / Downloads: 4) KCS_A8V3_V3.27.1.zip (Size: 1.29 MB / Downloads: 4) KCS_A16V3_V3.27.1.zip (Size: 1.31 MB / Downloads: 4) KCS_A32PRO_V3.27.1.zip (Size: 1.28 MB / Downloads: 4) KCS_AG8_V3.27.1.zip (Size: 1.23 MB / Downloads: 4) KCS_AGV3_V3.27.1.zip (Size: 1.17 MB / Downloads: 4) KCS_AIO_HYBRID_V3.27.1.zip (Size: 1.48 MB / Downloads: 4) KCS_ALR_V3.27.1.zip (Size: 1.21 MB / Downloads: 4) KCS_B2_V3.27.1.zip (Size: 1.3 MB / Downloads: 4) KCS_B4_V3.27.1.zip (Size: 1.3 MB / Downloads: 4) KCS_B4M_V3.27.1.zip (Size: 1.3 MB / Downloads: 4) KCS_B8_V3.27.1.zip (Size: 1.3 MB / Downloads: 4) KCS_B8M_V3.27.1.zip (Size: 1.3 MB / Downloads: 4) KCS_B16_V3.27.1.zip (Size: 1.3 MB / Downloads: 4) KCS_B16M_V3.27.1.zip (Size: 1.3 MB / Downloads: 4) KCS_B24_V3.27.1.zip (Size: 1.3 MB / Downloads: 4) KCS_B24M_V3.27.1.zip (Size: 1.3 MB / Downloads: 4) KCS_B32M_V3.27.1.zip (Size: 1.3 MB / Downloads: 4) KCS_CO16_V3.27.1.zip (Size: 1.29 MB / Downloads: 4) KCS_DM4_V3.27.1.zip (Size: 1.3 MB / Downloads: 4) KCS_DM8_V3.27.1.zip (Size: 1.3 MB / Downloads: 4) KCS_DM16_V3.27.1.zip (Size: 1.27 MB / Downloads: 4) KCS_DM32_V3.27.1.zip (Size: 1.3 MB / Downloads: 4) KCS_F4_V3.27.1.zip (Size: 1.29 MB / Downloads: 4) KCS_F8_V3.27.1.zip (Size: 1.29 MB / Downloads: 4) KCS_F16_V3.27.1.zip (Size: 1.3 MB / Downloads: 4) KCS_F24_V3.27.1.zip (Size: 1.3

ETS.png (Size: 163.54 KB / Downloads: 8) ETS project download: CO16.zip (Size: 103.09 KB / Downloads: 3)

new version improvement: Optimized memory issues to fix BACnet/IP protocol stack startup. KCS_A2V3_V3.27.1.zip (Size: 1.26 MB / Downloads: 2) KCS_A6V3_V3.27.1.zip (Size: 1.24 MB / Downloads: 2) KCS_A8V3_V3.27.1.zip (Size: 1.29 MB / Downloads: 2) KCS_A16V3_V3.27.1.zip (Size: 1.31 MB / Downloads: 2) KCS_A32PRO_V3.27.1.zip (Size: 1.28 MB / Downloads: 2) KCS_AG8_V3.27.1.zip (Size: 1.23 MB / Downloads: 2) KCS_AGV3_V3.27.1.zip (Size: 1.17 MB / Downloads: 2) KCS_AIO_HYBRID_V3.27.1.zip (Size: 1.48 MB / Downloads: 2) KCS_ALR_V3.27.1.zip (Size: 1.21 MB / Downloads: 2) KCS_B2_V3.27.1.zip (Size: 1.3 MB / Downloads: 2) KCS_B4_V3.27.1.zip (Size: 1.3 MB / Downloads: 2) KCS_B4M_V3.27.1.zip (Size: 1.3 MB / Downloads: 2) KCS_B8_V3.27.1.zip (Size: 1.3 MB / Downloads: 2) KCS_B8M_V3.27.1.zip (Size: 1.3 MB / Downloads: 2) KCS_B16_V3.27.1.zip (Size: 1.3 MB / Downloads: 2) KCS_B16M_V3.27.1.zip (Size: 1.3 MB / Downloads: 2) KCS_B24_V3.27.1.zip (Size: 1.3 MB / Downloads: 2) KCS_B24M_V3.27.1.zip (Size: 1.3 MB / Downloads: 2) KCS_B32M_V3.27.1.zip (Size: 1.3 MB / Downloads: 2) KCS_CO16_V3.27.1.zip (Size: 1.29 MB / Downloads: 2) KCS_DM4_V3.27.1.zip (Size: 1.3 MB / Downloads: 2) KCS_DM8_V3.27.1.zip (Size: 1.3 MB / Downloads: 2) KCS_DM16_V3.27.1.zip (Size: 1.27 MB / Downloads: 2) KCS_DM32_V3.27.1.zip (Size: 1.3 MB / Downloads: 2) KCS_F4_V3.27.1.zip (Size: 1.29 MB / Downloads: 2) KCS_F8_V3.27.1.zip (Size: 1.29 MB / Downloads: 2) KCS_F16_V3.27.1.zip (Size: 1.3 MB / Downloads: 2) KCS_F24_V3.27.1.zip (Size: 1.3

Пожалуйста, добавьте Weigand в вывод MQTT.

Пожалуйста, добавьте Weigand в вывод MQTT.

new version improvement: 1: support CO16 controller 2: added BACnet, DMX512, KNX protocols 3: added enable/disable Tuya module option 4: added "Modbus Slave Debugger" tool in webpage KCS_B32M_V3.27.0.zip (Size: 1.3 MB / Downloads: 8) KCS_A2V3_V3.27.0.zip (Size: 1.26 MB / Downloads: 7) KCS_A6V3_V3.27.0.zip (Size: 1.24 MB / Downloads: 9) KCS_A8V3_V3.27.0.zip (Size: 1.29 MB / Downloads: 8) KCS_A16V3_V3.27.0.zip (Size: 1.31 MB / Downloads: 8) KCS_A32PRO_V3.27.0.zip (Size: 1.28 MB / Downloads: 8) KCS_AG8_V3.27.0.zip (Size: 1.23 MB / Downloads: 6) KCS_AGV3_V3.27.0.zip (Size: 1.17 MB / Downloads: 6) KCS_AIO_HYBRID_V3.27.0.zip (Size: 1.48 MB / Downloads: 6) KCS_ALR_V3.27.0.zip (Size: 1.21 MB / Downloads: 8) KCS_B2_V3.27.0.zip (Size: 1.3 MB / Downloads: 6) KCS_B4_V3.27.0.zip (Size: 1.3 MB / Downloads: 6) KCS_B4M_V3.27.0.zip (Size: 1.3 MB / Downloads: 7) KCS_B8_V3.27.0.zip (Size: 1.3 MB / Downloads: 6) KCS_B8M_V3.27.0.zip (Size: 1.3 MB / Downloads: 6) KCS_B16_V3.27.0.zip (Size: 1.3 MB / Downloads: 7) KCS_B16M_V3.27.0.zip (Size: 1.3 MB / Downloads: 6) KCS_B24_V3.27.0.zip (Size: 1.3 MB / Downloads: 8) KCS_B24M_V3.27.0.zip (Size: 1.3 MB / Downloads: 6) KCS_CO16_V3.27.0.zip (Size: 1.29 MB / Downloads: 7) KCS_DM4_V3.27.0.zip (Size: 1.3 MB / Downloads: 7) KCS_DM8_V3.27.0.zip (Size: 1.3 MB / Downloads: 6) KCS_DM16_V3.27.0.zip (Size: 1.27 MB / Downloads: 7) KCS_DM32_V3.27.0.zip (Size: 1.3 MB / Downloads: 7) KCS_F4_V3.27.0.zip (Size: 1.29 MB / Downloads: 8) KCS_F8_V3.27.0.zip (Size: 1.29 MB / D

I have an OLED screen 1.5" 128x128 IC: SH1107. I can use this screen on esp32 dev board or ESP8266 without issue. If i connect to my KC868 A6 I2C bus it does not get found with i2C scan. I find its address using I2C scan on another device as 0x3C. if i go ahead and use that address in a EspHome yaml configuration to try and force a connection it fails. could this be pull up resistor issue?

new version improvement: 1: support CO16 controller 2: added BACnet, DMX512, KNX protocols 3: added enable/disable Tuya module option 4: added "Modbus Slave Debugger" tool in webpage KCS_B32M_V3.27.0.zip (Size: 1.3 MB / Downloads: 3) KCS_A2V3_V3.27.0.zip (Size: 1.26 MB / Downloads: 2) KCS_A6V3_V3.27.0.zip (Size: 1.24 MB / Downloads: 3) KCS_A8V3_V3.27.0.zip (Size: 1.29 MB / Downloads: 3) KCS_A16V3_V3.27.0.zip (Size: 1.31 MB / Downloads: 3) KCS_A32PRO_V3.27.0.zip (Size: 1.28 MB / Downloads: 2) KCS_AG8_V3.27.0.zip (Size: 1.23 MB / Downloads: 2) KCS_AGV3_V3.27.0.zip (Size: 1.17 MB / Downloads: 2) KCS_AIO_HYBRID_V3.27.0.zip (Size: 1.48 MB / Downloads: 2) KCS_ALR_V3.27.0.zip (Size: 1.21 MB / Downloads: 3) KCS_B2_V3.27.0.zip (Size: 1.3 MB / Downloads: 2) KCS_B4_V3.27.0.zip (Size: 1.3 MB / Downloads: 2) KCS_B4M_V3.27.0.zip (Size: 1.3 MB / Downloads: 2) KCS_B8_V3.27.0.zip (Size: 1.3 MB / Downloads: 2) KCS_B8M_V3.27.0.zip (Size: 1.3 MB / Downloads: 2) KCS_B16_V3.27.0.zip (Size: 1.3 MB / Downloads: 2) KCS_B16M_V3.27.0.zip (Size: 1.3 MB / Downloads: 2) KCS_B24_V3.27.0.zip (Size: 1.3 MB / Downloads: 2) KCS_B24M_V3.27.0.zip (Size: 1.3 MB / Downloads: 2) KCS_CO16_V3.27.0.zip (Size: 1.29 MB / Downloads: 2) KCS_DM4_V3.27.0.zip (Size: 1.3 MB / Downloads: 2) KCS_DM8_V3.27.0.zip (Size: 1.3 MB / Downloads: 2) KCS_DM16_V3.27.0.zip (Size: 1.27 MB / Downloads: 2) KCS_DM32_V3.27.0.zip (Size: 1.3 MB / Downloads: 2) KCS_F4_V3.27.0.zip (Size: 1.29 MB / Downloads: 2) KCS_F8_V3.27.0.zip (Size: 1.29 MB / D

Hello, we recently bought and set up the KC868-A8S with a Midea heat pump. ESPHome was used to set up the switches, binary sensors and modbus. The first two work as intended, while the modbus seemingly not being able to read or send requests properly. Here is the chunk of the code that relates to and might influence the modbus and one of the sensors: Code: esphome: name: centralina-freddo friendly_name: Centralina freddo esp32: variant: ESP32 flash_size: 4MB board: esp32dev logger: api: encryption: key: [cencored for privacy] ota: - platform: esphome password: [cencored for privacy] i2c: - id: bus_a sda: GPIO4 scl: GPIO5 scan: true ethernet: type: LAN8720 clk: pin: GPIO17 mode: CLK_OUT mdc_pin: GPIO23 mdio_pin: GPIO18 phy_addr: 0 uart: - id: uart_1 tx_pin: GPIO33 rx_pin: GPIO32 baud_rate: 9600 stop_bits: 1 parity: NONE data_bits: 8 rx_full_threshold: 8B debug: direction: BOTH modbus: - id: modbus_1 uart_id: uart_1 role: client modbus_controller: - id: modbus_controller_1 address: 0x01 modbus_id: modbus_1 setup_priority: -10 update_interval: 15s sensor: - platform: modbus_controller name: "Temp. Esterna (PdC)" id: pdc_esterna_TP modbus_controller_id: modbus_controller_1 address: 107 register_type: holding unit_of_measurement: °C device_class: temperature state_class: measurement value_type: S_WORD accuracy_decimals: 1 Attempted fixes (that did not work): phisically inverting the A and B connections changing the modbus controller adress changing the sensor adress to hexadecimal

I have an OLED screen 1.5" 128x128 IC: SH1107. I can use this screen on esp32 dev board or ESP8266 without issue. If i connect to my KC868 A6 I2C bus it does not get found with i2C scan. I find its address using I2C scan on another device as 0x3C. if i go ahead and use that address in a EspHome yaml configuration to try and force a connection it fails. could this be pull up resistor issue?

Hello, we recently bought and set up the KC868-A8S with a Midea heat pump. ESPHome was used to set up the switches, binary sensors and modbus. The first two work as intended, while the modbus seemingly not being able to read or send requests properly. Here is the chunk of the code that relates to and might influence the modbus and one of the sensors: Code: esphome: name: centralina-freddo friendly_name: Centralina freddo esp32: variant: ESP32 flash_size: 4MB board: esp32dev logger: api: encryption: key: [cencored for privacy] ota: - platform: esphome password: [cencored for privacy] i2c: - id: bus_a sda: GPIO4 scl: GPIO5 scan: true ethernet: type: LAN8720 clk: pin: GPIO17 mode: CLK_OUT mdc_pin: GPIO23 mdio_pin: GPIO18 phy_addr: 0 uart: - id: uart_1 tx_pin: GPIO33 rx_pin: GPIO32 baud_rate: 9600 stop_bits: 1 parity: NONE data_bits: 8 rx_full_threshold: 8B debug: direction: BOTH modbus: - id: modbus_1 uart_id: uart_1 role: client modbus_controller: - id: modbus_controller_1 address: 0x01 modbus_id: modbus_1 setup_priority: -10 update_interval: 15s sensor: - platform: modbus_controller name: "Temp. Esterna (PdC)" id: pdc_esterna_TP modbus_controller_id: modbus_controller_1 address: 107 register_type: holding unit_of_measurement: °C device_class: temperature state_class: measurement value_type: S_WORD accuracy_decimals: 1 Attempted fixes (that did not work): phisically inverting the A and B connections changing the modbus controller adress changing the sensor adress to hexadecimal