Toyota Tacoma Forums forum

I was looking around for Access Cab thread, So I can get some inspirations for mods on mine. But correct me if I'm wrong, it was only for 2nd gen that I see. If there is a thread already for this one, link me please. If not, feel free to show your access cab!

So I’ve looked on here and can’t exactly. Find what I’m looking for but as stated I’m trying to wire up my trans cooler fan to a on off toggle in the cab. I think this is right but am unsure bc it says Pin 86 (Switch Trigger): Connect this pin to your dashboard toggle or push-button switch. The other side of your switch connects to a 12V power source (either ignition-switched or constant. so I’m assuming run that pin to negative on the switch and then the switch positive to the add a... Wiring a relay and switch for trans cooler fan help

For the last year or so for me (on PC) I was locked into Escape From Tarkov, iRacing, and Space Engineers. Since the infamous "Wiggle" video (if you know EFT, you know), Tarkov has been a shitshow, so I've branched out a bit. First, I started dabbling in Ground Branch which is pretty good in it's Alpha state. Similar to Ready or Not, the AI is excellent at ambushes while simultaneously mindlessly charging in to any fatal funnel you create. There is no progression in the game whatsoever, so... What games are in your current rotation?

Let's see some pics of your Blazing Blue Pearl truck!!

Posts to follow for installation help: Speedometer assembly/lower dash... https://www.tacomaworld.com/threads...t-interior-parts.449999/page-26#post-13229954 Steering wheel... https://www.tacomaworld.com/threads/2014-steering-wheel-control-install.362309/ Center console/stereo...... Feeler/Interest gauge for 12-15 blackout interior parts

Looking for recommendations on what longer wheel stud I should use on my Taco. I noticed that I am only grabbing a little over 6 turns of the lug nut on the stock stud. So I figured I would install longer wheel studs to not only resolve the amount of thread used to mount the wheel but also allow me to install a 3/8 slip on spacer to give me a little more poke. TIA..

Went to get tires rotated at Les Schwab, they told me my front brake pads were at 2MM. Going to change very soon. How long will these last before I damage rotors if I order brake pads online and wait on them to ship and deliver? Also which Akebono brake pads will fit front? There’s many different ones. Will ACT799 part number fit? Thanks

This is the front bumper on my 2018 Tacoma. Almost all the clips are there but it's really loose. Any ideas for an easy fix? Can I just epoxy the two pieces together or would there ever be a reason that they need to come apart? I don't want the piece falling off on some of the bumpy roads I drive on. Richard

Hello… GF of 2014 Tacoma Prerunner here Having issues with brakes. Have changed pads twice in less than a year. Keep losing break fluid, pads wear down quickly damaging rotors. I have to bleed them often. Also need suggestions on whether or not I might be able to repair dents in fender beneath passenger side headlight.

Hi everyone, Once.i get back into my taco in a tundra currently its a great truck but leased and for my needs just too big and a gas hog. Lease ends in February so going back to a taco. Looking at travel trailers in the next few years so looking for ideas what do you all have? Thanks,

After searching a bit I didn't see a thread for those of us in this part of NY to chat or plan get togethers. Thinking along the lines of Orange, Rockland, Sullivan, Westchester, Ulster, Putnam, Dutchess, Delaware counties and slightly beyond into NJ, PA, and CT. I apologize if there already is one and I missed it.

Post up your Favorite whiskey. Right now my favorites are a couple of small batch made here in Iowa.