Dernier sujet il y a 6 j

Yamaha FZ6 Forums

www.600riders.com

Forum XenForo en anglais. 12 rubriques suivies : Bike of the Month, Contests, FZ6 Electrical, FZ6 General Discussion, FZ6 Technical, Garage / Mechanical Help, Hall of shame, Main Lobby / New Member Section, Member Interviews, Mileage contests., Scavenger Hunt et Site Announcements.

Discussions par jour
4
Discussions collectées
237
Messages par jour
46
Rubriques
12
Sources suivies
13
Moteur
XenForo

Dernières discussions

Relevé toutes les 4 heures depuis le flux public du forum. Seuls le titre, le lien et le début du message sont repris ; chaque lien renvoie à la source.

04-06 - SW-Motech Removable Side Racks - Missing Parts

For Sale - SW-Motech Quick-Lock Removable Side Rack System - Missing 2 parts, please read before purchasing Rack setup was taken off 2005 Yamaha FZ6. When removed, I accidentally left two parts (#5 and #13 - see directions pictures in Picture 4 of the ebay listing). The first part is just a M8 spacer that is 10mm tall. I will include some spare M8 bolts in case you just want to cut the thread off and drill out the centers. The others spacers aren’t really needed and rack will... Read more

S2 Gauge cluster housing replacement question..

My S2 gauge cluster, inside the main screen, is beginning to fail. In fail, it appears as if there's moisture INSIDE the upper left side, however there isn't. So, I suspect time has taken it's toll on the plastic. As the assembly works fine, I found an aftermarket assembly HOUSING.. It appears the housing (front and back), just bolt together. Question, does the OEM housing just un-screw and come apart, or is it sealed and would to be pried apart? Anyone replace their outer housing... Read more

S2 Gauge cluster housing replacement question..

My S2 gauge cluster, inside the main screen, is beginning to fail. In fail, it appears as if there's moisture INSIDE the upper left side, however there isn't. So, I suspect time has taken it's toll on the plastic. As the assembly works fine, I found an aftermarket assembly HOUSING.. It appears the housing (front and back), just bolt together. Question, does the OEM housing just un-screw and come apart, or is it sealed and would to be pried apart? Anyone replace their outer housing... Read more

Power Drop after 8K RPM

FZ6N 2008, It has a weird power loss at around 8K RPM all the way to redline (sometime power does come back for a split second), doesn’t happen if the bike’s cold, only when it’s at operating temperature, It ran fine 2 weeks ago and I didn’t replace any part during that time, no vacuum leak, injectors are working and cleaned (tested on bench with FI tester), it has new fuel pump, spark plugs are not multi grounded (NGK) as the service manual recommended, ignition coils are bench tested and... Read more

Power Drop after 8K RPM

FZ6N 2008, It has a weird power loss at around 8K RPM all the way to redline (sometime power does come back for a split second), doesn’t happen if the bike’s cold, only when it’s at operating temperature, It ran fine 2 weeks ago and I didn’t replace any part during that time, no vacuum leak, injectors are working and cleaned (tested on bench with FI tester), it has new fuel pump, spark plugs are not multi grounded (NGK) as the service manual recommended, ignition coils are bench tested and... Read more

2006 S1 windscreen

Looking for a new windscreen. OEM or aftermarket. My 2006 windscreen is stained and crazed. Also looking for throttle assembly, OEM handlebars, rear side fairings in red, front fender.

OEM Handlebars 2006 model

Looking for OEM handlebars for a 2006 Also looking for throttle assembly, windscreen, rear side covers.

ISO: OEM handlebar

In search of OEM handlebars. Shipping would be to 76252. Trying to avoid paying the ridiculous OEM prices online.

S2 Crank but no start. Low d09

Hello everyone. Fazer 600 S2 ABS 2009. The bike sometimes cranks but does not start. - The battery is in very good condition. Refubrished magneto, Shindegen SH847 series regulator with new wiring to the battery terminals, charging voltage 14.3v -14.6V - New spark plugs, cleaned injectors, adjusted engine valves, synced throttle body, new fuel pump, new air filter. - I found out that the main switch had bad contacts (resistance was changing when slightly moving the key from 3 to 180 ohms)... Read more

S2 Crank but no start. Low d09

Hello everyone. Fazer 600 S2 ABS 2009. The bike sometimes cranks but does not start. - The battery is in very good condition. Refubrished magneto, Shindegen SH847 series regulator with new wiring to the battery terminals, charging voltage 14.3v -14.6V - New spark plugs, cleaned injectors, adjusted engine valves, synced throttle body, new fuel pump, new air filter. - I found out that the main switch had bad contacts (resistance was changing when slightly moving the key from 3 to 180 ohms)... Read more

237 discussions collectées depuis le 2 septembre 2026. Suivre ce forum par mot-clé →