Contractor Talk

Hi guys, my name is Robert from Lancaster California, hope all of you guys are well. I'm here to make some new friends in the trades and network. I also have some questions on how to get my C-33 painting license. After almost 20 years of painting its time to figure out how to acquire my license.

One thing I’ve found useful in electrical work is understanding what’s actually happening when a system develops a fault, rather than just knowing which breaker to reset. Different types of faults can produce very different symptoms, so having a basic understanding of fault currents, circuit breakers, and protection devices can make troubleshooting much more straightforward. The same goes for equipment like transformers and motors. Knowing their basic operating principles and what normal... Understanding Electrical Faults in the Field

One thing I’ve found useful in electrical work is understanding what’s actually happening when a system develops a fault, rather than just knowing which breaker to reset. Different types of faults can produce very different symptoms, so having a basic understanding of fault currents, circuit breakers, and protection devices can make troubleshooting much more straightforward. The same goes for equipment like transformers and motors. Knowing their basic operating principles and what normal... Understanding Electrical Faults in the Field

What features from older cars do you actually miss? I miss wing windows that could be opened. I got my first speeding ticket in a 1967 Chevelle SS with a 396 under the hood. I don't miss the tickets. Calling "old" anything pre-1985, but bend the rule if you've got a good example. What's yours?

Here's a few pictures but more pictures and details can be found on my FB listing: Facebook

Hi everyone, I’m looking for some advice on common industrial gearbox problems. We recently started experiencing unusual noise, increased vibration, and occasional overheating from one of our gearboxes during normal operation. The gearbox is properly lubricated, but the issue seems to be getting worse over time. I’d like to understand what could be causing these symptoms and whether they might indicate worn gears, bearing failure, misalignment, or another mechanical problem. What... Common Industrial Gearbox Problems and How to Prevent Them

Why can’t I find a .90mm metric plug for my chemical injecter on my power washer so I can use my downstream I’ve been searching everywhere stores only have 1/8 someone please help

I was call for plumbing job Iwork and work scope was to flush the the summon l well and change the kitchen bottle trap and to tap and also the w/ c, cover and labour cost payment to flush the summon well too total 150,000 naira and I carry out the job completely the assigned work, on the quote,client mention another work after i have finished the first work .Water filter was not momtion no the first work approach , client said it is my place to mention it as i was the one taking inventry... Client missunderstanting

Florida Certified General Contractor willing to qualify your reputable company state wide. 850-902-8387

So we're just finishing a$1.6 million build out for a private school.( in Miami) Had a $1000 a day fine if late. But we Did fine. But client rep."Ed " had gotten more and more difficult. Had fought all legitimate charge orders. Through out this project, he had his own maintenence guys do the cabinetry and tile work to keep his cost down( I'm the qualifier and the supervisor on this job, but not the connect holder) This building is connected to their actual school, so this rep walks in... Difficult client?

So we're just finishing a$1.6 million build out for a private school.( in Miami) Had a $1000 a day fine if late. But we Did fine. But client rep."Ed " had gotten more and more difficult. Had fought all legitimate charge orders. Through out this project, he had his own maintenence guys do the cabinetry and tile work to keep his cost down( I'm the qualifier and the supervisor on this job, but not the connect holder) This building is connected to their actual school, so this rep walks in... Difficult client?

I notice that a lot of commercial spaces with single occupancy restrooms have deadbolt indicators in the door nowadays, but it seems to me they don't really make much of a difference in terms of the bottlenecks that they're designed to eliminate. I came across a company called Heads Up Lock and they have a system that connects the deadbolt to a visible LED light that can be installed at a distance from the bathroom door. Has anyone heard of this or installed it? If so, what are your thoughts?