forums.aida64.com

Why don't the gadget settings include the following items: GPU Name CPU Name ?

promote somes sensors to riuyin 3

Hello AIDA64 doesn't show the CPU/MB temperatures of ECS B75H2-M3 (V1.0) and the voltages are wrong too 🤔

I have a Corsair iCUE LINK H150i LCD connected through an iCUE LINK System Hub. AIDA64 sees the System Hub and LCD in the Corsair Link Dump, but no coolant temperature appears under Computer → Sensor. SignalRGB is able to read the H150i coolant temperature, so the sensor is available from the hardware. I tested with SignalRGB completely closed and there was no change. Corsair Hydro Platinum Sensor Support and Corsair Link Sensor Support are both enabled. Is iCUE LINK System Hub coolant-temperature monitoring currently supported by AIDA64? AIDA64 Extreme v8.35.8400. System Hub VID/PID: 1B1C:0C3F . Corsair Link Dump below... ------[ Versions ]------ Program Version : AIDA64 Extreme v8.35.8400 LLKD Version : 1021 BenchDLL Version: 4.7.931.8-x64 Windows Version : Microsoft Windows 11 Pro 10.0.26200.9168 (64-bit) GetProductInfo : 0x00000030 ------[ Motherboard Info ]------ Motherboard ID : Motherboard Model : MSI MPG Z690 Carbon WiFi (MS-7D30) Motherboard Chipset : Intel Alder Point-S Z690, Intel Raptor Lake-S DMI MB Manufacturer : Micro-Star International Co., Ltd. DMI MB Product : MPG Z690 CARBON WIFI (MS-7D30) DMI MB Version : 1.0 DMI MB Serial : 07D3011_MB1E278307 DMI SYS Manufacturer: Micro-Star International Co., Ltd. DMI SYS Product : MS-7D30 DMI SYS Version : 1.0 DMI SYS Serial : Default string DMI BIOS Version : 1.O0 ------[ DevClass / Human Interface Devices ]------ HID-compliant consumer control device \\?\hid#vid_04d9&pid_fc61&mi_02&col01#9&36b93218&0&0000#{4d1e55b2-f1

Looking for one of the various moderno themes in 480x320. I see they exist, but not on their site for downloading

ROG Crosshair 2006 – missing/incorrect motherboard sensor readings in AIDA64 Hi, I’m experiencing a sensor monitoring issue in AIDA64 on an ASUS ROG Crosshair 2006 (X870E) . In the latest AIDA64 version , some motherboard sensors either disappear completely or show incorrect values. In the previous version , the sensors would disappear intermittently: sometimes they were detected correctly after launching AIDA64, and sometimes they were missing. The issue seems related to ASUS monitoring software. After installing Armoury Crate or ASUS MB Manager , motherboard sensor readings in AIDA64 become unreliable or disappear. At the same time, HWiNFO reads the same motherboard sensors correctly and consistently , even when AIDA64 has the issue. System: ASUS ROG Crosshair 2006 (X870E) Windows 11, latest build AIDA64: latest version Armoury Crate / ASUS MB Manager installed HWiNFO: no sensor issues Could you please check whether there is a compatibility issue with sensor monitoring on the ROG Crosshair 2006, especially when ASUS monitoring services are installed? I can provide sensor dumps, ISA Sensor Debug information, or other diagnostics if needed.

Hi, I've a Corsair Dom Plat RAM module. It keep disappearing from the system. When it disappear everything that's reading its info went dark. AIDA64 sensor panel temps readout blank, SignalRGB stop RGBing (stop update RGB), even iCUE also didn't see the RAM too. Any idea or where to even begin collecting info to troubleshoot this? Only way to get it back is to power cycle. Restart won't work. Need shutdown, wait for lights out, then turn on again. Thanks

Hello Basically as title says. For GPU i have the option to show fan speed in %, but not for case fans or cpu...could you add this please? Thank you.

When I switch to Fahrenheit the gauges use Celsius warning levels. normal Celsius levels show maximum high temp when changing to Fahrenheit readings.

I have a 1920x480 monitor mounted inside my pc that show my sensor panel. It has been fine till a couple weeks ago. I saved my files and reinstalled AIDA64 but that didn't fix the problem. Here's a screenshot of what it should look like and what it's displaying when I move the sensor over to the internal monitor. Any ideas of what may be happening?

Hi all Im new here and dont know much about the software - I have my sensor panel running fine for nearly a year now. I checked if there is an update available for AIDA and there is - however it constantly says update failed. Am I stuck on this version because I havent paid for the software - even though it came with my MSI motherboard? Thanks in advance.

Hi, I'm using an ASUS ROG Flow Z13 (2025), model GZ302EA, with AIDA64 Extreme v8.35.8400. AIDA64 is not reading the fan speeds correctly. Armoury Crate correctly reports both fans (for example, CPU Fan ~2400 RPM and CPU AUX Fan ~2800 RPM), but AIDA64 does not show the fans on the Computer > Sensor page. In SensorPanel, AIDA64 offers a Cooling Fans > CPU sensor, but it displays an invalid value around 4,294,967,299 RPM. ASUS WMI sensor support, ASUS ATKEX sensor support, Embedded Controller (EC) support, and Low-level sensor operations are enabled. I have attached my ISA Sensor Dump. The dump appears to show both TACH(0) and TACH(1) returning 4294967295. Could support for the two fan RPM sensors on the GZ302EA be added or corrected? Thank you. isasensordump.txt