Forum Can-Am ATV Forum

Hi from Œrnsköldsvik mid Sweden. Recently got me an old Bombardier Traxter XT to transport me around the farm doing odd jobs.

Hi so I have a question my 2002 bombardier quest 650 is leaking oil from the chain tensioner and from crankshaft and was wondering if I might need to readjust the valves and replace the crankshaft seal and is it easy to replace the seal thanks in advance

Recently swamped and hydraulic locked my unit. Got it home, drained oil, plugs out and purged water. Got it going again… for about 30 seconds it ran. Now I have the condition of crank and no start. Won’t even sputter. These are the things I’ve checked. Good spark (new plugs) Good compression (150 psi) Runs with fuel being poured down intake. Good fuel pressure (51 psi) Fuel injectors actually spraying good mist Removed flywheel to check keyway (intact) Cam timing is bang on. Has fuel, air... Hello! driving a 2009 Can-Am Outlander 800

scan transsmision fault

Just joined to learn more about what will help me get the best out of my Can-Am and enjoy it.

I have a 2018 Can-Am Defender Max Lone Star edition that recently blew a hole in the wall of my transmission. I cannot find any exact match used transmissions for my part number and am wondering if anybody had any info on what other transmissions might I be able to swap on later models? The original part number for my transmission was #420686453, but it looks like it was replaced by part #703501140. While searching for used ones I can find multiple options from the years 2020 to 2023... Hey from raylunto, I have a 2018 Can-Am Defender MAX Lone Star looking to swap transmissions

Pornește la prima chei și dacă-l opresc nu mai pornește trebuie să aștept 5 minute și pornește iar

Im a Canadian avid hunter. I have 2006 outlander that has been great until recently.

Can you help me with a performance tune for a 2010 Can-Am Renegade 800 if I send you the original software/dump?It has a big bore kit expanded to 850cc with high-compression Wiseco pistons, a throttle body bored out to 51mm, Webcam camshafts, and double valve springs.I can't find anyone in my area to help me, and I was hoping you could assist. What would be the price for this service? Thank you in advance."

I am new to this forum and have little to no experience with any forum. I just bought a 2020 Outlander 850XP. I thought I got a good deal until I got it home and checked it over. It needed everything from all the fluids changed,air filter was packed with dust, missing lots of fasteners and bolts. The main issue right now is the aluminum right rear grab bar bracket is broken. I tried to look it up on patzilla but couldn't even find the grab bar.i do have a lot of experience looking up parts... rear grab bar bracket

Can you help me with a performance tune for a 2010 Can-Am Renegade 800 if I send you the original software/dump?It has a big bore kit expanded to 850cc with high-compression Wiseco pistons, a throttle body bored out to 51mm, Webcam camshafts, and double valve springs.I can't find anyone in my area to help me, and I was hoping you could assist. What would be the price for this service? Thank you in advance."

Can you help me with a performance tune for a 2010 Can-Am Renegade 800 if I send you the original software/dump?It has a big bore kit expanded to 850cc with high-compression Wiseco pistons, a throttle body bored out to 51mm, Webcam camshafts, and double valve springs.I can't find anyone in my area to help me, and I was hoping you could assist. What would be the price for this service? Thank you in advance."