Forum AppliancePartsPros Forum

Thank you for your response. Would you be able to recommend what can I do to solve it? Who can help me? I spoke with two repair companies, both have given up which was quite strange. The fridge is normally working well, I do not want to discard it straight away. I appreciate your guidance.

Took the steps you indicated, and I do have some ice this morning, but not much. The freezer temperature is, and has been 0°. It looks like it’s making ice some times, but not near as much as before, given that I filled the tray with water around 7:00 pm yesterday evening. Again, thanks for the help.

Digger1: WL26CW1-96215A The error code that you are getting would indicate a water inlet or bleach valve solenoid issue. If the solenoids have been replaced, check the wiring and if it is good then the board would be the issue.

The things that would cause this would be an air leak which sounds like you have already ruled out. The other thing would be an incomplete defrost which would likely be an issue with the defrost thermistor.

It would be recommended to see if the freezer is cold enough. Also check to make sure that there is proper airflow coming out of the top vent on the side wall. You can push the light switch to check this.

If the compressor comes on but does not cool then this will likely be a sealed system issue in which it would need to be repaired by a service tech due to sealed system issue if there are parts available.

shariLcollins7: JBS86SP5SS With the center burner not coming on then this will be a faulty element which would need to be replaced. GE WB30T10130 Range Cooktop Radiant Heating Element | Genuine OEM Part

If you create a photo in google you should be able to attach it.

WIth the display board having already been replaced, this will be an issue with the control panel. GE WB56X25765 Wall Oven Control Panel Assembly | Genuine OEM Part

PainINtheAss2: 796-31523210 The motor readings that you are getting would be within specifications. On the hall sensor you have should have 3 MOhms from pin 1 to pin 4 and from pin 2 to pin 4. Then you should have 9Kohms from pin 1 to pin 5 and Pin 2 to Pin 5. If all the tests are good then the control board would be the issue.

We would need to have the model number of your appliance to be able to assist properly with any question. Also, please provide the part number of the icemaker you installed.

Brand: Frigidaire Model Number: FGHG2366PF7A Main Symptom: Refrigerator section not cooling What happens & when: Every 3 weeks there is frost accumulation in the Freezer section near the supply air vents just above the defrost coils. Since there are no coils in this area, frost accumulates. I turn off my fridge for 12 hours, ice melts and the fridge operates normally, only for the same problem to return in about 3 weeks. We got a repair specialist to review, he confirmed everything is in working order and is not able to solve the problem. I want to understand what is causing the frost accumulation in that area? Are there any solutions for this? Would you please be able to help? This is such a peculiar case and my question is out of curiosity. The defrost system is working ok, Fan was recently replaced, Damper was replaced, Door gasket also visually looks to be a good shape (to nullify any air leakage possibility). Error Code (if any): Parts or tests already tried: Damper ok, Fan ok, Defrost sensor ok. Photos / video link: