Ski-Doo Snowmobiles Forum forum

Went to my dealer this morning and bought a case of the new XPS Max two stroke oil. On the way out, one of the guys behind the counter said, "You're getting old man. Now you're buying cases of oil instead of beer!" Been a while since I bought a case of beer. Does it cost $75 per gallon like the Doo oil? Come on winter!

looking to get a Tread or Zumo XT. Apparently, these units are almost identical except that the Tread has preloaded trail maps. Zumo XT is currently almost $100 cheaper. I ride in NY and New England. Are the preloaded Garmin maps as good as the third-party maps like vvmapping and GPSTrailmasters? Thanks. John

I recently got two identical Summit Xs in a trade deal, just 200 vin numbers apart. One of them runs great, the other was intended as a parts sled. The parts sled is in pristine condition with only 1000 miles though and the only issue is a burned out MPEM. If I plug the running sled's MPEM into it it runs. Thus I have decided to get it running too. Since the MPEM is no longer made and I am concerned about longevity of 90s electronics and future parts availability if I do choose to keep the... 99 Summit X 670 MPEM options

I'm sure most of us here will never watch the movie, but I wonder how much of his time racing snowmobiles is touched on?

Let's hope diesel prices come down, currently $6-8.50/gal from east coast to west, I don't see sled clubs grooming to often at those prices. Rmotion and PPS3 to the rescue!

This document was compiled from some of the best on the forums and with a ton of information from the shop manuals, technical updates, race manauls, press releases, and the dealer network. Daag44 and myself wanted to present a short 30 page write up of the Etec motor. We wanted to share some inside information in a technical presentation but with facts and photos. Most of this information has never been public due to its protected by the dealers and brp since they hold the documents. As... Etec History Write Up

I need to replace the 2 small oil injection lines on my 380 Touring E...... the lines that go from the oil pump to the carbs, or carb flanges. Not exactly sure what you call them. Best source for these lines? Thank you.

Has anyone seen any truck loads of red and white crates yet? I know it’s still early but I’m seeing 27 preorders from everyone else.

I have a 2020 skidoo renegade xrs 850. Gonna part out so plan to use xrs shocks on my 2025 skidoo adrenaline 600R. Let me know

What mods have you donever to your skidoo? Schassis suspension? Motor? Electronics? Appearence?

I'll post some photos below to give a visual. Last season I noticed some side to side play in my ski so I figured I'd replace the bushings. Well... Not as easy as I thought. These things might as well be welded in, I can't get them to budge no matter how much I swing with a hammer and flathead. I did also try using some penetrating oil and letting it sit overnight, which didn't seem to help. You can see that I actually ended up chipping away the outer edge on one of the bushings but it still... Help with ski spindle bushing removal? SUPER stuck.

I have the high beam set on my backcountry, but one of our other sleds only has the stock light haven’t ridden a 5 with the wide light, wondering if anyone has had both sets of lights but maybe separately on different sleds