IH8MUD Forum forum

Several folks have been looking for the programming instructions to add keyless remotes to their LC...This works for 98-03 as far as I know. These instructions have been tested and worked when I added a new keyless remote for my LC 2000 (I have limited mechanical ability and it was relatively easy) You must have a working master key ..If your adding a new remote key you should have the key cut and program the transponder for the key, the correct instructions are listed in several... Read more

Has anyone ever found a replacement for these plastic door limiter bushings? I took my doors off and one of them dropped to the floor and as per the norm, rolled off in to another dimension.

Anyone have success with undercarriage treatments in the Northeast? I’ve run across several (Fluid Film, Krown, NHOU) but have no experience/applications with any of them. Thanks for any insights you have!

Has anyone tried the SOR aftermarket door mirrors? I'm working to get the hardtop and doors on my 1980 BJ41 and I need mirrors. I noticed these two options: I'm kind of leaning towards the euro ones. Thanks for any wisdom or suggestions anyone has.

So I was trying to wire up my camper with a new 12v system and whipped this planning tool up to help me do that - sharing it here in case anyone finds it useful (its free). Happy to take feedback / tweak to make it more useful. https://6min.dev/loomwright/ Admin delete if not allowed. Yes is vibe-coded, but it's still useful!

What's the thing behind the passenger rear quarter trim, with the corner vent?

Hello, Been looking everywhere for similar issues, but my Sequoia is making a grinding noise from my transfer case, which the shop told me is the chain. Has anyone replaced that or done a xcase rebuild? Anyone know the part numbers, etc? Would be a great help! Thanks

Hey guys I’m about halfway through my install on my hidden winch mount and wanted to share this as I’ve had a ton of people asking on Instagram about it. Alignment on this was perfect, it slid right on after removing the front bumper and supports. It’s extremely heavy duty with great welds and lots of support. Finish on it was excellent as well. Only issue I’ve had is my control box bumps the AC line in front of the radiator so I’m making a bracket to move the box slightly forward. Weight... Read more

Hello! I recently sold my built 2004 GX470 and acquired a stock 2011 LX570. It desperately needed new tires, so I went and got some Icon Vector 5 Titanium 17x8.5 +25 wheels and some Falken Wildpeak AT4W 285/75r17 tires. My plan is to get the maintenence up to date before building out any further (AHC globes, brakes, valley plate). Looking forward to the journey ahead!

I am wiring a new set of offroad lights that also have a daytime running light and turn indicator function that operates independently of the offroad lights. I want the DRLs to come on automatically once the truck is running. I figured I could do this by wiring a standard 4-pin 40A relay triggered by the "charge" circuit via this thread: https://forum.ih8mud.com/threads/whats-a-good-12v-switched-source-underhood.881174/ I am having a problem when I hook up the relay, the voltage... Read more

Hello 45ers. Ok....I know im looking for a unicorn..... ok 2 Finally got back to working on a couple of the metal family members... Have a 66 FJ45 LWB that one of the PO decided to buy bigger tires.... and rather than buy a lift... they cut the bed wheel wells......ya..... .................not terrible, but would love to see her 100% again..... Thanks for looking...... and thanks for any info and/or leads

I have a 2019 LC 200. I have owned (this is random but 6 200s) a 200 since 2009. I love my truck. https://forum.ih8mud.com/threads/heritage-creation-build.1178824/ I recently bought my wife a 2026 Sequoia from @Eric Sarjeant . I really do love it as well. https://forum.ih8mud.com/threads/3rd-gen-sequoia-build.1384737/ I wanted to sort of give some thoughts about things since I have probably as much experience as anyone on here with 200s and just now getting to know... Read more