Electric Bike Forums forum

I am trying to put new grips on. I have searched extensively but have not found accurate information on how to get the right side grip off. Mine has an allen screw in the end which seems to do nothing. Why is the trick to get it off?

I have recently had to do brake bleeds on things such as gigantic cargo bikes and eTrikes. It is such a pain. This is where you can share your pain and pick up useful real world tips from others. One eTrike took two hours to get all the bubbles out. I just purchased these large 200 ml syringes to help. I do not care if I waste a little fluid. I want all the bubbles out fast. Here is a starting place video from Park Tool.

We just received two Lectric Trike2 750s. They seemed fine until we tried to ride them using the throttle to move from a dead stop. The throttles on each bike turn about 10 degrees (or about 1/4") before anything at all happens. Then the trike suddenly lurches and lunges forward. Is this normal? Lectric says "operating as designed." We've had two other ebikes (both kinds from Rad); their throttles were smooth and predictable from zero speed on up. Moving away from a dead stop was always... Read more

There isn't very much info that I've found on the web regarding Keyde other than the very helpful experience and insights @peterecosse shared on another thread https://forums.electricbikereview.c...ike-conversion-kit-on-the-scott-addict.57484/ and the info that Keyde provides. Feel free to post up your experience or opinions if you have any. Weather where I ride is firmly in the wet season so my experience has been limited but overall... Read more

I knew my country was beautiful and cycling friendly. Now, Poland as viewed by a foreign cyclist. Enjoy! Hah, how funny the Polish place names sound in English Not Morag. It is Moron-g

Hello l am having red light issues with my 2020 Giant Estance 29er. The bike ride control flashes up with a red light. It happens after a couple of minutes. I have checked the sensor position and have tried resetting the controller. I have added a 1mm spacer under the battery connector, this has been a fix for others. I had the spacer 3D printed. Unfortunately this isn't the route cause of my issue. I used the giant app and it reported a drive sync issue. I managed to use the app to set... Read more

I'm johana, my story with ebikes started three years ago, when i converted my mtb into an emtb. I t makes a key part of my life since then, i love how something that is apparently so simple, completely transform the way i ride!

I want to share with you guys this beauty of stand-up bike. I took the photo while visiting a friend of mine, it caught my attention because is the first time i see someone converted this kind of bike into an ebike, i didn't know kits were compatible too, i'm in love

We live in a hilly area with lots of forest service roads in the mountains. Looking for a bike that will give years of good service with replacement parts available. I can maintain it myself no problem. A bike that "feels" good, so from my brief readings probably torque sensing. Up to about $2500. I have a few ideas in my head on the make/model but really curious where this discussion goes. Thanks!

Still pushing my 2022 Vado 5.0 with 3rd motor and over 11,000 miles, gave it a break this Spring by obtaining a new Aventon Level 4 ADV to try out because of all the interesting specifications, new stuff, and affordability. Overall, it was a very interesting bike until it wasn't and a new ECU had to be ordered, installed, and I waited, and went back to the favorite Vado 5.0. That story is enmass on various forums. Once repaired, I went back to the ADV and got about 1,655 miles on it... Read more

Nice cheap 1100w version with removable 800wh. Is this just getting ridiculous.

I have a 5 year old Specilized Creo SL with more than 12,000 miles. Three times now the peddles get what can be described as mushy. In turbo or sport mode while climbing it feels like it is skipping and losing power. In the past I turned the motor off and it was fine. After a while turning the motor back on worked. Today, on a short ride, it happened and I went to eco mode and it stopped. My question: is the motor failing?