Green Tractor Talk forum

hello, Talking wheel spacers, I have a brand new 1025R with 54 inch MMM and some slope to my yard, does anyone have this set up and run any type of wheel spacers. I do have 50lb wheel weights but do not have fluid filled tires, really don't want to fill them either afraid it will rut my yard with the extra weight. So thoughts to will spacers size and issue and do they really help that much.

Dealer called due to my 3039r order being pushed out to end of Jan for delivery he said we could get a 3046r for Dec any advice? Is the extra hp really needed for the 72”mmm Thx

I've just about had it with the lawn sweeper and have decided to go with the JD Mulching Kit for the mower deck/tractor. I do have a couple of questions though: 1) I've always thought that for mulching blades to work well, the grass when cut, needed to be relatively short and dry. Unfortunately, spring mowing usually needs to wait for the ground to firm up enough to get the 1025R out to mow and by that time, the grass can be up to 6" deep. I know the mower has plenty of power to cut... Mulching Kit for 60D deck on 1025R

Saw this little guy sitting out by the road for sale. No posted price. Looks pretty good. Had a 4' grader blade and a pond scoop with it. I was wondering what the mechanism is on under the front axle is. Snow plow attachment? What does the critics think? Worth giving the seller a call? [ATTACH... To call or not to call JD650

I own a 1025R that I purchased from a JD dealer here in Covington, LA back in 2016. The tractor has ran like a trooper and the only problems I've had with it revolve mostly around the MMM deck but I've managed to work around them. I've performed the maintenance/inspections myself and I figured it would be around here long after me. Not so fast. About a month ago, as the cold weather started moving in the tractor was starting a little rough. Normally it's one or two cranks and a puff of... John Deere customer service comes thru on 1025R engine failure.

Hi gang. Thanks for all the “education” of information you have given me in past posts. I am needing to ree my larger primary air filter on my 1025R, so do I go to my local John Deere dealer and pay a higher price, or get on Amazon and buy from an Aftermarket supplier at a cheaper price and hopefully have the same performance results? Have done with a lot of other “items” in life and have had good results but am wondering how you guys feel about it. Thanks!

Searched the forum hunting for posts on installing gauges on my 950. I don't trust the warning lights and am looking to install a temp and oil pressure gauges. Any suggestions for sending unit locations? Water looks like on the block in front of the starter where the drain hose comes out will be the easiest. Oil looks like below the starter there is a galley with 4 spots. 1st one is for the warning light sensor and the last one has a hard line running to the other side of the head below the... Gauges for 950

Hey all, I recently picked up a 2024 3039R, open station, with 24 hours on it. I'm coming from my 2520 that I purchased new in 2012. The 3039 is taking some getting used to. Specifically, forward and reverse pedals. They are nothing like the 2520 which as I understand were a direct link to the hydro vs the 3039 that are electronically controlled. You have to use a fair bit of pedal before any response from the tractor. Are there adjustments to tighten this up? Also, when you let off the... New to me 3039R

Installed lift kit for my 72D mower. After everything was installed I tried the raise lower. Arms raised ok but will not go down. Tried a bit of pressure while pressing the down button. No good. Hose is attached to my lower SVC and I’m using the soft button on my joystick. Any ideas?

I have a 2005 2210 tractor. was out working around today and all of a sudden it won't start. All I get is a click. check the battery even bought a new one with the same result. Any ideas?

Hey I just bought a 755 and the pto will try to engage! It will bog the engine down and try cut off. It’s like the pto brake Will not release. Any help appreciated! It’s not going to be a safety switch unless it’s one that engages the brake that I’m not aware of.

Hi Gang. Thinking about purchasing a Front Receiver Hitch for my 1025R SCUT to move my 14 Ft Utility trailer around. Anyone have any experience with one, especially from Heavy Hitch and did it work ok with the Front Loader on? Thanks!