Kawasaki ATV Forum forum

I have converted my 07 mule 610 to electric fuel pump. Currently set up to pump through the stock fuel pump. Started up fine but had fuel coming out the carb vent. I purchased a 2.5-4 psi pump from Amazon. What could be causing this issue?

I have a 2020 FXT LE, looking for some tire options. I mainly use it on the farm, and road use. No trail riding. It has 5600 miles and I'm on my second set of front tires, which are Duros. Still original rears. Also the fronts wear out the inside tread more. I would like to put the same size on so I can rotate the tires. Maybe go to 26x9x12 all the way around? Any recommendation's would be helpful thanks

Hi folks! First post and first time UTV owner here. I picked up a 2007 diesel mule trans 3010 4x4 a few weeks ago and am starting to go through it and get it setup the way I want. I have mostly been fixing cosmetic issues and small stuff but I have noticed that at idle the machine will creep forward when in gear. It will do this in forward and reverse and sometimes it is difficult to shift the machine out of reverse. I plan to check the idle speed first once I get a hold of a tach that... 2007 Diesel 3010 creeps at idle and is sometimes hard to get out of reverse

I have a 2010 Brute Force 750i that has the fluids service every year, but has never had a tune up. Estimated just under 100 hours of service. It has suddenly become hard to start and requires a lot of throttle pumping to get it started. Once started, it will die while idling, but runs fine at higher RPMs. It had regular gas for the first 8 years, but has had ethynol free for the last couple of years. I am using a Sea Foam as a fuel preservative. Will a change of spark plugs fix this? If... Brute Force 750i starting problems

Picking up a cheap 2007 BF650i this weekend that has rod knock. Already found a cheap 2006 P700 bottom end in good condition. So my question is, will the BF650i top end work on the P700 bottom end? I know the 700 has a +3mm stroke. Using the stock BF650 cylinders this should net me approximately 664cc displacement so I can get a little bit of an upgrade for less work as well. Interested to hear from anyone who may have done the same or similar. Edit to add: After more research, I've... 07 BF650i top end on 06 P700 bottom end

Picking up a cheap 2007 BF650i this weekend that has rod knock. Already found a cheap 2006 P700 bottom end in good condition. So my question is, will the BF650i top end work on the P700 bottom end? I know the 700 has a +3mm stroke. Using the stock BF650 cylinders this should net me approximately 664cc displacement so I can get a little bit of an upgrade for less work as well. Interested to hear from anyone who may have done the same or similar. Edit to add: After more research, I've... 07 BF650i top end on 06 P700 bottom end

Does anyone know of someone selling a seat belt extender? It would be similar to what the airlines have. I have searched Amazon and the internet but nothing comes up specific for a Kawasaki UTV. Also is there an easy way to add a piece to extend the seat belt strap where it mounts near the retractable part? I thought of buying a strap that would bolt to the frame then attach to the end of the seat belt strap. Not ideal but if can't find a proper extender it may be my only choice. Any... 2025 mule pro fxr 1000 Seat Belt extender

Does anyone know of someone selling a seat belt extender? It would be similar to what the airlines have. I have searched Amazon and the internet but nothing comes up specific for a Kawasaki UTV. Also is there an easy way to add a piece to extend the seat belt strap where it mounts near the retractable part? I thought of buying a strap that would bolt to the frame then attach to the end of the seat belt strap. Not ideal but if can't find a proper extender it may be my only choice. Any... 2025 mule pro fxr 1000 Seat Belt extender

KFX700 bogging/misfiring My KFX700 started popping/farting from the exhaust and losing power at half throttle. It reacts late, then suddenly goes. What should I check first? Video attached Thank you everyone.

I have a solid but well-used 2007 Mule 3010 that I use for farm work and transporting family off-road. I am intrigued with the 4010 Trans for EFI and added seating. However, the EFI issues from crankcase venting into the intake, etc are scaring me. Has this be resolved in the 2026 models, or would I need to immediately modify a new vehicle by adding the crankcase reroute?? The 2007 Mule has been pretty solid. I don’t want to regret buying a newer vehicle if it’s going to be... Afraid to go from a 2007 3010 to a 2026 4010 Trans

I have a solid but well-used 2007 Mule 3010 that I use for farm work and transporting family off-road. I am intrigued with the 4010 Trans for EFI and added seating. However, the EFI issues from crankcase venting into the intake, etc are scaring me. Has this be resolved in the 2026 models, or would I need to immediately modify a new vehicle by adding the crankcase reroute?? The 2007 Mule has been pretty solid. I don’t want to regret buying a newer vehicle if it’s going to be... Afraid to go from a 2007 3010 to a 2026 4010 Trans

We have one of these on the Jeep board that i belong to as well. So i thought i would start one on here. I know some of us do something to our ATV's daily. Whether it be routine maintenance or something major. So lets see what you did to your TOY today!