It took a while but after finally hearing some of this guy's tunes and finding out that they are a complete pile of wank, he's managed to tick all the boxes. At first I thought he was just some annoying weird looking dickhead that talked a load of shite to justify his massive collection of overpriced second hand gear who's constantly trying to sell a load of cheap **** with his fucking name smeared all over it, but I finally checked out his music and it's properly ****. I will say he is a... OK, I Am Now In The I Hate Joe Bonamassa Camp
Marshall Amp Forum forum
www.marshallforum.com ↗XenForo-forum in het Engels. 5 rubrieken gevolgd: Guitars, Marshall Amps, Off Topic Lounge (Backstage), The Tone Zone en The Workbench.
- Discussies per dag
- 10
- Opgehaalde discussies
- 185
- Berichten per dag
- 16
- Rubrieken
- 5
- Gevolgde bronnen
- 6
- Software
- XenForo
Laatste discussies
Elke 4 uur opgehaald uit de openbare feed van het forum. Alleen de titel, de link en het begin van het bericht worden weergegeven; elke link wijst terug naar de bron.
I say no, but people so terrible these days.
I was playing a show this weekend where we were set up outside. We have a bunch of fake empty Marshall cabs to set up on the stage to make it look good so we got them set up. The show was in the backyard of a rich dude, so we were set up just outside his living room on a grand staircase that served as a drum riser, and was a couple of steps high. Our other guitar player set up his rig, and on one of the fake Marshall stacks, he puts his JCM800 head. It’s an early 80’s head, but that’s all... The Horror😢
Talk about anything, as long as it has to do with this thread. $29.95. Reserve yours today! (Made from 100% thread.)
Greetings to all Marshall lovers. I need a tech advice. My 6100LM is running good on 1st and 2nd channels. But 3rd channel works fine for a short period of time after switching the amp now. After that it sounds as it’s switched to clean channel. No volume drop just drastic loss of gain. Literally it starts to sound like clean channel. Turning gain knob do almost nothing until 70-80% of the dial when gain raises a little. This behavior can change back and fourth some time randomly. Checked... 6100 LM 3rd Channel Gain Loss
Greetings to all Marshall lovers. I need a tech advice. My 6100LM is running good on 1st and 2nd channels. But 3rd channel works fine for a short period of time after switching the amp now. After that it sounds as it’s switched to clean channel. No volume drop just drastic loss of gain. Literally it starts to sound like clean channel. Turning gain knob do almost nothing until 70-80% of the dial when gain raises a little. This behavior can change back and fourth some time randomly. Checked... 6100 LM 3rd Channel Gain Loss
I just picked up a new in box 1959HW on Friday. Upon first power up and within 15 seconds I could see the power tubes starting to glow nicely but I noticed a bright cherry red colour coming from what looked like under the filter caps. I could only see in from the top so maybey not the greatest angle but I could definitely see almost like an old electric stove ring of bright red. I powered it down immediately and unplugged it from the wall. If anyone has maybey experienced something... 1959HW help!
I just picked up a new in box 1959HW on Friday. Upon first power up and within 15 seconds I could see the power tubes starting to glow nicely but I noticed a bright cherry red colour coming from what looked like under the filter caps. I could only see in from the top so maybey not the greatest angle but I could definitely see almost like an old electric stove ring of bright red. I powered it down immediately and unplugged it from the wall. If anyone has maybey experienced something... 1959HW help!
Hello. I bought a DSL100hr and looks like I've been had or just had extremely bad luck that it broke when it was handed to me. The head turns on, the tubes light up orange, no flickering. The only time I could make a sound come out is when I switch between low and high output and vice versa, but then the sound fades immediately to nothing. I'm hoping it will be a quick cheap fix. Any ideas? Thanks.
Hello. I bought a DSL100hr and looks like I've been had or just had extremely bad luck that it broke when it was handed to me. The head turns on, the tubes light up orange, no flickering. The only time I could make a sound come out is when I switch between low and high output and vice versa, but then the sound fades immediately to nothing. I'm hoping it will be a quick cheap fix. Any ideas? Thanks.
. It's a beautiful day.
. It's a beautiful day.
185 discussies opgehaald sinds 9 September 2026. Volg dit forum op zoekwoord →