Laatste onderwerp 2 d geleden

Peugeot Forums forum

www.peugeotforums.com

XenForo-forum in het Engels. 5 rubrieken gevolgd: 207, 3008 (2017-2024), 307, 407 en General Peugeot Discussions.

Discussies per dag
7
Opgehaalde discussies
338
Berichten per dag
14
Rubrieken
5
Gevolgde bronnen
6
Software
XenForo

Laatste discussies

Elke 4 uur opgehaald uit de openbare feed van het forum. Alleen de titel, de link en het begin van het bericht worden weergegeven; elke link wijst terug naar de bron.

2004 Peugeot 307 CC 2.0 16V (EW10J4) - Looking for original ECU & BSI dumps (Valeo G0X-00)

Hi everyone, I have a 2004 Peugeot 307 CC 2.0 16V, 140 hp, with the EW10J4 engine, and I'm looking for the original ECU and BSI software/dumps for this exact configuration. If you have the original files, or a backup/dump from a 307 CC with the same setup, I would really appreciate it if you could share them. My BSI details: BSI: Valeo G0X-00 Plan: 9636760580 F Part number: 9644098280 Variant: D MCU: MC68HC912DG128 BOOT: 7.2 What I'm planning: I would like to use the original ECU and BSI... 2004 Peugeot 307 CC 2.0 16V (EW10J4) - Looking for original ECU & BSI dumps (Valeo G0X-00)

Error code P1335

Hi I discovered this error message on my P407 coupe 3.0 V6 petrol today during diagnostics. P1335 which, as the name suggests, is the position of the front or rear intake shaft unknown. It was a coincidence, as the engine runs fine (at least it seems that way to me). Consumption between 9-10L combined, so that's also ok. Do you have experience with this error message? From what I googled, it should probably be one of the camshaft position sensors. But I don't understand why the... Error code P1335

Help needed with fault codes please

For some time now I've been wrestling with these problems on my daugthers 2008 308 1.6hdi, engine code is 9HX. I am posting in this forum because the vehicle is an early 308/late 307. It all started with the engine management system failure message & a beep, switching the engine off and restarting solved it for days usually. this is now permanently on every time it starts and the throttle pedal does nothing, the engine starts but runs at approx. 1200rpm regardless of what I do... Help needed with fault codes please

Roof problem, peugeot 308cc

Cześć, posiadam Peugeota 308 CC z 2010 roku i mam problem z dachem. Wszystko działa dobrze, ale podczas zamykania – a konkretnie, gdy dochodzi do etapu blokowania dachu i pokrywy bagażnika – pojawiają się błędy „niekompletny mechanizm dachu” i „uszkodzony mechanizm dachu”. Czasami, gdy wyłączę silnik, odczekam i ponownie uruchomię, zamykanie dobiega końca; czas oczekiwania waha się od 3 do nawet 33 minut. Komputer pokładowy wskazał usterkę prawego mechanizmu blokującego dach, ale wszystko... Roof problem, peugeot 308cc

P0601 P0606 Gasoline in Dieseltank , got airbag light

Hi I accidentally poured some gasoline in my Peugeot 308 sw diesel car and got a airbag light on straight away that wont go away. A P0601 code came along and maybe also a p0606 code but the later one might not be related. I cant erase the code with standard code readers and now I believe its a this checksum error code that I got when the fuel mix was wrong for a short while. Car works perfect, no problems at all, but airbag light is on and I cant take it for inspection cause they will not... P0601 P0606 Gasoline in Dieseltank , got airbag light

4007 - Noise

Can anyone tell me what this noise is when I turn off ignition? Is it something to be worried about?

Tyre pressure adjustment and reinitialise

I adjust my tyres after I got this notification on my dashboard and still the warning keep popping every time i switch on my car. What else do I need do to clear the warning sign. I drive a Peugeot 2008 model, 73 plate.

Tyre pressure adjustment and reinitialise

I adjust my tyres after I got this notification on my dashboard and still the warning keep popping every time i switch on my car. What else do I need do to clear the warning sign. I drive a Peugeot 2008 model, 73 plate.

308 GTi speaker upgrade

Hi everyone Wished to ask if the speakers in the 308 GTi can be upgraded with focal ones. I've heard that they are a plug and play solution. Does anyone know where they can be bought and how simple the installation is? I would love Denton ones but apparently it's quite a costly retrofit. Cheers all Matt

AdBlue troubles

Hi all, I already posted some time ago: https://www.peugeotforums.com/threads/urea-adblue-p20f6-issues.380857/?post_id=2466984 (308 SW from 2016 1.6 HDi.) But I am still having issues... In the meantime I have replaced the AdBlue tank (found a good one from a disassembler online) and I have replaced the NoX sensor as well (also from a disassembler). So everything is replaced, as far as I can tell: AdBlue injector, AdBlue tank and NoX sensor. I also added a decent amount of... AdBlue troubles

momentary hiccups in power when accelerating hard.

Ever since I got the car, I noticed that whenever I accelerate hard in 2nd gear, I'd feel the torque in the car pretty hard, as you should, but I also noticed there would be these "blips" in the engine power where I'd feel the car no longer accelerating. These "blips" in power would last less than a second, and then I'd feel the power return. If I were to explain this with visuals, it would look something like this: Normal accelerating: 1st gear: ->->->-> 2nd gear... momentary hiccups in power when accelerating hard.

338 discussies opgehaald sinds 27 August 2026. Volg dit forum op zoekwoord →