Suzuki SV650 Riders Forum forum

What size should i fit on the front, 120/60 or 120/70? How hard is it to do it yourself? Ive done dirt bike tyres but these are different. Do i need new valve stems too. It would save me over $200 if can manage at home. Better to ask before you go ahead yeah? Thank you guys.

I just installed these beauties today. I don't think I can truly describe how great of a job SV racing has done when it comes to creating these. Absolutely beautiful product for what it is. Painless install, although I did have some issues with my master cylinder reservoir hitting the clip on. Had to fabricate a spacer.

I am looking to install an aftermarket muffler on my 2023 SV. After reviewing all the options, my preference is the Scorpion Serket since it does not ever need to be repacked. The company says, however, that the muffler will not fit on a 2023 SV although online it says it fits on a 2016-21. I assumed that all Gen 3 bikes were pretty much identical and anything that fits a 2016 would fit a 2023. But they said when it comes to the 2023, "where the link pipe fits to the OE exhaust it is... Has anyone installed a Scorpion Serket muffler on a 2023 SV?

Before: After: That unsightly stack of washers has irked me since I bought the bike. I should have sorted it a lot sooner.

Bike is 2017 SV650 ABS After the past two rides, a small amount of engine oil has leaked from under the engine (making a stain about 5cm wide). I changed the oil a month ago and filled up to just under the fill line. Today, the bike didn't start and showed 'FI' for fuel injection issue. I got the bike into dealer mode and found the code C12. As a start, I've been recommended to try disconnecting and cleaning the connector for the crank position sensor as there is a small chance of one of... C12 Error code - Crankshaft Position Sensor

that has had multiple problems with the tb I've tried syncing them and put new plugs in clean the fuel injectors had to re build my fuel pump I've do all i can think of, when i rode it it was struggling to get to 30 mph in 1st gear and 40 in 2nd I'm thinking its running on one cylinder. any know what ive couldve missed i adjustr the tps, idle screw evthing i need help ive posted in here about these problems please LMK!!!

I’ve been riding for almost 10 years now. I’ve had 4 crashes, all involving either rain or oil spilled on the road. Of course, right after rebuilding my bike, I crashed again after only 600 miles. This time it was because of a poorly repaired crack in the road, while riding in the rain, at like 5 mph. 😭 Now I have to do it all over again. :/

Just got my 2nd hand SV650 last week. Looking forward to learn and enjoy this beautiful bike

I live in western Pennsylvania just bought a used 2003 sv650

Probably a real shot in the dark here, but if anyone has one of these sitting around (maybe a take off from a bike you're getting ready to sell, or parting out a wrecked bike) then I'd gladly give it a good home.

Here i will document the work i need to do to my beautiful bike in future. Keep it in one place. Rear brake master cylinder rebuild kit has arrived. Ordered some 2.4 w Motorex fork oil to soften the front end the new springs are a tad bouncy with my low body weight. Fronts not matching the back. Ordered a new exhaust can a Yoshimura TRS i got at an absolute bargain price new here in Aus, should be here tuesday about. This one below. $614 delivered they... Work to do on my SV!

Here i will document the work i need to do to my beautiful bike in future. Keep it in one place. Rear brake master cylinder rebuild kit has arrived. Ordered some 2.4 w Motorex fork oil to soften the front end the new springs are a tad bouncy with my low body weight. Fronts not matching the back. Ordered a new exhaust can a Yoshimura TRS i got at an absolute bargain price new here in Aus, should be here tuesday about. This one below. $614 delivered they... Work to do on my SV!