RedSquare forum

$30 takes all of them

This is a brand new 1961 wheel horse toy made by Auburn. I have several of these so I'm listing this new set because I already have three complete sets open in a display case. It is the red tractor inside not the yellow one. All six implements and the driver are in the package as well.

1 set of red head hubcaps, two for 12 in rear rims and two for 8in front rims. There not perfect but be real good for a nice patina tractor. There a few little dings, a few pitted spots and the one front has 2 decent scratches. They show there age but still useable for sure.

I have a couple of things going on with my 312-8. I have a moderate grade that I mow and usually go up it in low 1st gear, recently it barely makes it up the hill, I also have to keep my hand on the shifter to make sure it doesn't pop out of 1st gear. One other thing, when starting, I have to apply rearward pressure to the shifter while in neutral. Any advice would be appreciated.

September 21, 1985, a little-known actor named George Clooney makes his first appearance as a handyman on the popular TV sitcom The Facts of Life. Clooney appeared in 17 episodes of the show, which aired from 1979 to 1988 and chronicled the lives of a group of young women who meet at a fictional boarding school. Years later, he moved on to Hollywood superstardom in the hit TV medical drama ER and such films as The Perfect Storm, Ocean’s Eleven, Michael Clayton, Up in the Air, Gravity and Hail, Caesar!.

1985 Wheel Horse 314-8 with less than 1200 hours. Starts and runs good. New seat. Available attachments include 42 inch mower deck and rear mount tiller. Also included: Belts, Mule drive, Rear wheel brackets. Located in Whitestown, Indiana Tractor $600 Mower deck $300 Tiller $300 Package deal = $1000 OBO

My 72 Raider 8-10 was shifting harder and harder and now only finds reverse. I don't know much about these gear boxes. Not much about transmissions in general. Where do I start? Gear oil is fresh 80/90. Shifter? Forks? Anything would be useful. Thanks

I’ve owned this tractor twice. Bought it from the last guy who I sold it to. This time it’s in much better condition than it was when I first bought it the first time. It was a younger fella who really didn’t understand what he had. It was sitting outside and I asked him does it run and he starts it up and must’ve been a couple gallons of water came out of fan shroud. The steering wheel was all bent out of shape. I don’t know what happened here but anyway that’s all done now. I have a lot of spare parts. But it had a bad motor in it so luckily a friend of mine had a spare motor sitting on the shelf. So here’s a couple pics in a short video. I am happy with the way it turned out. IMG_1412.mov IMG_1413.mov

I am in need of a pair of the gauge wheel assemblies, part number 94-2364 for my 60" 5xi mower deck. I found one on eBay but not willing to pay $175 for NOS. https://www.ebay.com/itm/117328866978?_skw=toro+94-2364&itmmeta=01M2ZXB36MM1D9XRMAA6ERAWBV&hash=item1b51586ea2:g:m6wAAeSwhQNqag8r&itmprp=enc%3AAQALAAAA0GfYFPkwiKCW4ZNSs2u11xA1Jyu%2B8hUeewoI280gMFC%2FQN7ywTPcQZv1g0jahx5Lpbh8UiLekeuZ%2FCqgZQeveWJXDApbUCocp6PUNsfQl5vwA9JCLvENt%2BJBq4Xn%2FPBohSQ8Q3sPgsYnNIz4oG4d54duBpJpPmuEfrmm5zfT%2BREW8nzhp1B5cqBeWGvEHn%2Bj5HCxKQO9vVlwP7mdvDgm3dWxgeB2H%2FOlOWkbXvUtVuNQHO84X3FjWNR3JDKYz56y0gTZWY0qtWsvpd4DmokEVJA%3D|tkp%3ABk9SR8KzrP2XaA

Hi all, have a c120 and i must have a bad spindle it shreaded the pto belt yesterday . I have a rear discharge 36 . 5 deck inside measurement . Can someone tell me the correct belt and length i need to get for it ? Where to buy as well ? Do has anyone had this problem with the c120 the spindles seem to spin free . Could it be something else seizing up the meal drive pully seem to Move easy

Looking for a clevis hitch for a C161 auto. Doesn't need to be a beauty queen. I would need it shipped to Missouri.

So I've got a C101 with a 121 engine swap and I have this problem that's been getting worse and I can't figure it out. It doesn't really matter if the grass is tall or short, but after a while (sometime between 15 minutes and an hour) the engine will bog down to the point of barely running with the PTO engaged. If I take the PTO it will remain bogged down for about 10 seconds and resume normal running speed. I've gone through most what I could think of and I'm not sure what's going on. The blades are sharp, I've tried loosening and tightening the belt tension, pulleys are freshly greased, I've played with the tension on the PTO lever. It's got a new air filter, fuel pump, and spark plug. Oil and transaxle fluid are in good shape. The friction disk is getting a little low, but I still have about .025" until I'm at the rivets. When I first got it about 6 months ago it was running like a champ, now I get maybe 15-30 minutes of run time until the engine bogs down and I can't mow anymore. Sometimes if I let the tractor sit about an hour I can get another 5-10 minutes until the problem comes back. What do you folks think it could be?