Fórum ModalAI Support Forum

I'm confused by all of the new data. Can you summarize? You have tested with 2 different USB cameras: Lepton and c270. You have tested with 3 viewers: QGC, VLC, and ffplay. You have tested with 2 applications: voxl-uvc-server and voxl-streamer. Only one network connection: Microhard. Can you also try a MIPI camera instead of a USB camera? Then can you create a matrix saying which ones worked and which ones didn't?

Hi @moderator The operating range is 2-6S input VBAT. We currently have no plans for >6S at this time on the ESCs. The 40V is a part rating which gives margin for safe operating limits, transient immunity, or other electrical effects. This is documented to instill confidence in our users that we selected quality parts capable of handling various conditions outside of nominal such as back-EMF, energy dumps, incorrect wiring, or severe transients. We are keeping tabs on the trends in this market and will ascertain for future products if increased operating points are warranted broadly. I do see up to 8S is becoming more popular, but it will increase size and cost of products to enable that capability. Thanks!

@Colby-Howell New order# 8874.

@Colby-Howell New order# 8874.

Yes, you can connect to one of the UARTs on J19. However, there are only 3 UARTs so you'll have to choose which one to use. The PWM outputs on the IO expander are mainly intended to be used when you have PWM ESCs instead of a ModalAI UART based ESC. In that case you would connect to the ESC UART. If you want to use the IO expander in addition to a ModalAI UART based ESC then you will have to choose between the RC UART or the GNSS UART.