Fórum Riderforums

I had just left the driveway, bike running great as usual then all of a sudden it just shut off. Cranks over but won't restart. Battery seems fine, has gas, fuses good and no signs of anything weird . It was as if someone hit the kill switch. I'll be digging in to it soon but thought I would check here in case anyone has any helpful thoughts. Thank you.

I had just left the driveway, bike running great as usual then all of a sudden it just shut off. Cranks over but won't restart. Battery seems fine, has gas, fuses good and no signs of anything weird . It was as if someone hit the kill switch. I'll be digging in to it soon but thought I would check here in case anyone has any helpful thoughts. Thank you.

Anybody have a ticking sound in the carbs when the bike is warming up? If I put my finger on the throttle linkage (synchronization screw), you can feel it pulsing/ticking. Like the butterfly is opening/closing and hitting the "cylinder walls" (venturi walls) indside the carb. What causes that? Is it the vacuum of the engine trying to suck the butterfly open? Maybe the vacuum isn't high enough when it's warming up to hold the butterfly slightly open and that's why it gets better... ticking sound in carbs

Anybody have a ticking sound in the carbs when the bike is warming up? If I put my finger on the throttle linkage (synchronization screw), you can feel it pulsing/ticking. Like the butterfly is opening/closing and hitting the "cylinder walls" (venturi walls) indside the carb. What causes that? Is it the vacuum of the engine trying to suck the butterfly open? Maybe the vacuum isn't high enough when it's warming up to hold the butterfly slightly open and that's why it gets better... ticking sound in carbs

I have a 2002 meanstreak 1500 and i need to remove the front cylinder cam tensioner, but need to remove the air tube that goes to the other side, gad a look yesterday, but it seems to be wedged between the cylinders, any advice how to remove it would be appreciated

I have a 1998 Bandit with 80K miles. On a recent trip of 160 miles, the bike started and ran fine as usual. The weather was warm and sunny. At the last gas stop before our destination, when I turned on the ignition switch to start the bike, only the green neutral light and red oil pressure light on the dash came on. Everything else electrical on the bike was totally dead and of course the bike would not start. The main fuse was OK, the kill switch was off. The battery was not dead and... Bandit electrical problem

Hi everyone i’m new here, i just got a 2000 kawasaki zr7 as my first bike, for the first 2 days everything is okay but for the 3rd day morning i start it up and heard random tiny clicks noise, i decided to find where it may come from and it come from the left side of the engine, sometimes it’ll be loud, sometimes small but if i rev it the sound disappear, when i got the bike the valve clearance haven’t been done despite owner has it for around 6-7 years, so i wonder if anyone have the same... Weird noise on my new bike

Hi everyone i’m new here, i just got a 2000 kawasaki zr7 as my first bike, for the first 2 days everything is okay but for the 3rd day morning i start it up and heard random tiny clicks noise, i decided to find where it may come from and it come from the left side of the engine, sometimes it’ll be loud, sometimes small but if i rev it the sound disappear, when i got the bike the valve clearance haven’t been done despite owner has it for around 6-7 years, so i wonder if anyone have the same... Weird noise on my new bike

04-05 zx10 r fork legs and axle and spacers forks rebuilt and resprung for my weight and intentions. 09 zx10 lower triple, pivot works tapered bearings, abm 09 zx10 top clamp. Zx14 nissin calipers brembo master Zx14 lower wind deflector Stock wheel, disks 07 versys swingarm Yss adjustable shock. Modified fairings I need a zx6 rear wheel kit or information on the machining process if anyone can help me out.

04-05 zx10 r fork legs and axle and spacers forks rebuilt and resprung for my weight and intentions. 09 zx10 lower triple, pivot works tapered bearings, abm 09 zx10 top clamp. Zx14 nissin calipers brembo master Zx14 lower wind deflector Stock wheel, disks 07 versys swingarm Yss adjustable shock. Modified fairings I need a zx6 rear wheel kit or information on the machining process if anyone can help me out.

2006 Ninja 650R. I was riding to work the other day running about 75mph and all the sudden lost power (about half power) I got to where I could pull over and as I slowed down the bike lost all power and the engine cut off. Towed home and started googling problems… replaced the fuel pump and fresh gas today but when I tried to start it only started for a few seconds and then nothing it just cranks but never fires off. Any thoughts or suggestions are appreciated.

2006 Ninja 650R. I was riding to work the other day running about 75mph and all the sudden lost power (about half power) I got to where I could pull over and as I slowed down the bike lost all power and the engine cut off. Towed home and started googling problems… replaced the fuel pump and fresh gas today but when I tried to start it only started for a few seconds and then nothing it just cranks but never fires off. Any thoughts or suggestions are appreciated.