Forum The Suzuki Bandit forum

Hi - I have a 2003 Suzuki GSF Bandit 1200S and while investigating Factory Pro's 4030m kit I noted that they say their Long Boy 4030m screws replace the OEM ones 13279-01DN0 which of coure are not the ones in the Gen2 BSR36SS carbs my bike has - 132791...

Hello mate are you sure it's the carb? could it be a 1/ dodgy plug, swap them over to see if the fault follows the plug, 2/ dodgy HT lead or coil. I'd check before paying a lot for carbs. Les.

are they OEM pegs ? its very rare to see them sag !!!! unless the have had a lot of use.

have you fitted a new float valve ? whats number 3 plug look like ?

Hi all I’ve got an ongoing problem with the carbs on 2002 600. I’ve been fighting with the carbs all summer , got back after the holiday and every time I’ve gone through the carbs when I take it out it drops onto 2 1/2 - 3 carbs and it always seems t...

There might be some on Ebay

There might be some on Ebay

Or could anybody tell me the parts number or suggest where to get some thanks.

Or could anybody tell me the parts number or suggest where to get some thanks.

:lYou don’t need a jack or exhaust gaskets just swap the cams, and if needed the rocker arms , easily doable with the engine in place

:lYou don’t need a jack or exhaust gaskets just swap the cams, and if needed the rocker arms , easily doable with the engine in place

Quote from: fatblokeonbnadit on September 12, 2026, 17:01:17 pm If it was me I’d have a look 8n the spare engine, see what the cams are like, also the rocker arms, as they ware when the cams are pitted..and see if they are bette...